ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India
ASTM A234 Pipe Fittings Manufacturers In India

ASTM A234 WP5, WP9, WP11, WP22, WP91 Seamless Alloy Steel Buttweld Pipe Fittings Manufacturers in India, a234 wp5 fittings, A234 wp9 fittings, A234 wp11 fittings, A234 wp22 fittings, A234 wp91 fittings, wp91 fittings

ASTM A234 Wp91 Fittings manufacturers in India, ASTM A234 WP11 Fittings Exporters in India, ASTM A234 Weld Fittings

ASTM A234 WP5, WP9, WP11, WP22, WP91 Seamless Alloy Steel Buttweld Pipe Fittings Manufacturer In India, ASTM A234 Wp11, ASTM A234 Wp11 Cl2, ASTM A234 Grade Wp11 Exporters in India, ASTM A234 Wpb Pipe Fittings, A234 Material suppliers in India, A234 Fittings, A234 Gr Wpb manufacturers, Alloy Steel Buttweld Fittings Suppliers in India


Find a grade range from India's award winning ASTM A234 WP11/ WP9 Long Radius Bend, ASTM A234 WP11/ WP9 Lateral Tee manufacturers, Alloy Steel Pipe Fittings Manufacturers, ASTM A234 WP5 FITTINGS, ASTM A234 WP11 Fittings manufacturers in India, ASTM 234 WP22 FITTINGS, ASTM A234 WP91 Pipe Fittings, ASTM A234 Wp11 Alloy Steel Pipe Fittings manufacturers, ASTM A234 Wp11 Alloy Steel Fittings manufacturers in India, ASTM A234 WP11/ WP9 Buttweld Fittings manufacturer, ASTM A234 WP11/ WP9 Weld Fittings suppliers, ASTM A234 WP11/ WP9 Elbow, ASTM A234 WP11/ WP9 Tee suppliers in India, ASTM A234 WP11/ WP9 Reducer, ASTM A234 WP11/ WP9 Pipe Bend


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


Alloy Steel Pipe Fittings Manufacturers, ASTM A234 Wpb, ASTM A234 Gr Wpb, ASTM A234 Fittings Manufacturers in India
Call: +91 9930552852 | Send Enquiry: sales@skylandmetal.in



What is A234 WP11/ WP9 Pipe Fittings?

ASTM A234/A234M-10 Standard Specification for Pipes Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP- 79, MSS-SP—83, MSS-SP-95, and MSS-SP-97. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. Fittings differing from these ASME and MSS standards shall be furnished in according with Supplementary Requirement S58 of Specification A960/A960M

A234 WP1/ WP5/ WP9/ WP11/ WP22 / WP91 Fittings Heat Treatment

Heat Treatment Procedures – fittings, after forming at an elevated temperature below the critical range under suitable conditions to prevent injurious defects caused by too rapid cooling, but in no case more rapidly than the cooling rate in still air. Heat treatment temperature specified are metal (part) temperatures. Heat- treatment fittings shall be treated according to paragraph 7 in specification A960/A960M.

WPB, WPC, and WPR Fittings

Hot-formed WPB, WPC, and WPR fittings upon which the final forming operation is completed at a temperature above 1150 °F [620° C ] and below 1800 °F [980 °C] need not be heat treatment provided they are cooled in still air. 7.2.2 Hot-formed or forged WPB, WPC, and WPR fitting finished at temperature in excess of 1800 °F [980 °C] shall subsequently be annealed, normalised, or normalized and tempered. Hot-forged fittings NPS 4 or smaller need not be heat treated.

WPB, WPC, and WPR fittings over NPS 12, produced by locally heating a portion of the fitting stock to any temperature for forming, shall be subsequently annealed, normalized, or normalized and tempered. fittings such as elbows tees, header tees, reducers and lap joint stub ends with a carbon content less than 0.26%, NPS 12 and under, shall not require heat treatment after forming a locally heated portion of the fitting.

Fittings of Grades ASTM A234 WP1, WP11 Class 1WP11 Class 2WP11 Class 3, WP12 Class 1, WP12 Class 2, WP22 Class 1, WP22 Class 3, WP5, and WP9 shall be finished in the full-annealed, isothermal – annealed, or normalized and tempered condition. If normalized and tempered, the tempering temperature for WP11 Class 1, WP11 Class 2, WP11 Class3, WP12 Class 1, and WP12 Class 2 shall not be less than 1150 °F [620 °C] for Grades WP5, WP9, WP22 Class 1, and WP22 Class 3 the tempering temperature shall not be less than 1250 °F [675 °C]

 



ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India

A234 WP11/ WP9 Pipe Fittings Specifications :


Material Size (mm) SCH/ Class Thickness Specification Manufacturing Method
Alloy Steel Pipe Fittings
15NB to 600NB
200NB to 1800NB
SCH 40 to XXS 
SCH 10, 20, 30, 40, 80
3.91 to 60mm
6.35 to 60mm
A234 WP 
A234 WP
Seamless
Welded

 

ALLOY STEEL SEAMLESS TEE ASTM A234 WP11 carbon steel pipe fitting reducer elbow tee

Material: Malleable iron/ carbon steel
Items Elbow, Tee, Socket, Nipple, Plug, Union, Bushing, Cap, etc.
Design: Banded, Beaded & Plain
Weight: Heavy type & Light type
Surface treatment: Hot dipped galvanized, Electric galvanized, Oil-rust
Packing: 1. Two inner boxes in one carton, with/without pallet.
2. Double plastic woven bags, with/without pallet
3. Or as per customer’s special requirement.
Standard:
British Standard American Standard DIN Standard
Materials: ISO5922 Materials: ANSI/ASME/A197-79 Materials: DIN1692
Dimensions: ISO49 Dimensions: ANSI/ASME B16. 3-85 Dimensions: DIN 2950
Threads: ISO7/1 Threads: ANSI/ASME B1.20.1 Threads: DIN 2999
Usage:
Our pipe fittings are suitable for joining pipe lines of steam, gas, oil, air and are also used as apparatus for fencing and railing.


Grade Specification
Alloy Steel: ASTM/ASME A234/ SA234
ASTM A234 WP11/ WP9 Fittings Size
Seamless:from 1/2" to 24"
Welded:from 24" to 96"
(or as customer requirements)
ASTM A234 WP11/ WP9 Fittings Degree
22.5 deg, 30deg,45 deg,90 deg,180 deg,
1.0D, 1.5D, 2.0D, 2.5D, 3D,4D,5D,6D,7D-40D.
ASTM A234 WP11/ WP9 Fittings Thickness
SCH10, SCH20, SCH30, STD SCH40,
SCH60, XS, SCH80., SCH100,
SCH120, SCH140, SCH160, XXS
Standard
ASME B16.9, ASME B16.25, MSS SP-75 
DIN2605 JISB2311 JISB2312 JISB2313,
BS, GB, ISO
Alloy Steel Material
Alloy Steel 
(ASTM A234 WPB, A234WPC, A420 WPL6, etc)
Stainless steel
(ASTM A403 WP304, 304L, 316, 316L, 321,etc)
Alloy steel
(ASTM A234 WP12, WP11, WP22, WP5, WP9, WP91, etc)
ASTM A234 WP11/ WP9 Fittings Type
Seamless / Welded / Fabricated
ASTM A234 WP11/ WP9 Fittings Bending Radius
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
ASTM A234 WP11/ WP9 Fittings Range

½" NB to 48" NB in Sch 10s, 40s, 80s, 160s, XXS.
From 1/2 to 30 (Seamless Pipe Fittings), Form16 to 100 (Seam Pipe Fittings)

Dimensions
ANSI/ASME B16.9, B16.28, MSS-SP-43.
Applicable Standards
1-ASME B 16.9 for large Bore 
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
Seamless/ Welded 100% Radiography Tested


Standard Description
ASTM A182/A182M Forged or rolled alloy steel pipe flanges, forged fittings and valves and parts for high temperature service.
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM A403/A403M Wrought austenitic stainless steel piping fittings.
ASTM A815/A815M Wrought ferritic, ferritic/austenitic and martensitic stainless steel piping fittings.
AS 2129 Flanges for pipes, valves and fittings
ANSI/ASME B1.20.1 Pipe threads, general purpose (inch).
ANSI B16.5 Steel pipe flanges and flanged fittings.
ANSI B16.9 Factory-made wrought steel butt-welding fittings.
ANSI B16.11 Forged steel fittings socket-welding and threaded.
Socket Welding and Threaded Forged Fittings
ANSI B16.25 Butt-welding ends.
MSS SP43 Wrought stainless steel butt-welding fittings.
Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
BS21 Threading.
ISO 4144 Stainless steel fittings threaded to ISO 7-1.
MSS SP-95 Swage(d) Nipples and Bull Plugs
BS3799 Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry
ANSI – B 16.9
ASTM A403 – ASME SA403

‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’

API 590-605
ASME B16.9
‘Factory-Made Wrought Buttwelding Fittings’
ASME B16.25 ‘Buttwelding Ends’
ASME B16.28 ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’

 

ASTM A234/ A234M-10

Grade Class Construction Mandatory Marking
WPB
W (Welded construction)
S (Seamless construction)
WPBW
WPB
WPC
W (Welded construction)
S (Seamless construction)
WPCW
WPC
WP1
W (Welded construction)
S (Seamless construction)
WP1W
WP1
WP12
CL1
CL2
W (Welded construction)
S (Seamless construction)
WP12 CL1W
WP12 CL1
WP12 CL2W
WP12 CL2
WP11
CL1
CL2
CL3
W (Welded construction)
S (Seamless construction)
WP11 CL1W
WP11 CL1
WP11 CL2W
WP11 CL2
WP11 CL3W
WP11 CL3
WP22
CL1
CL3
W (Welded construction)
S (Seamless construction)
WP22 CL1W
WP22 CL1
WP22 CL3W
WP22 CL3
WP5
CL1
CL3
W (Welded construction)
S (Seamless construction)
WP5 CL1W
WP5 CL1
WP5 CL3W
WP5 CL3
WP9
CL1
CL3
W (Welded construction)
S (Seamless construction)
WP9 CL1W
WP9 CL1
WP9 CL3W
WP9 CL3
WPR
W (Welded construction)
S (Seamless construction)
WPR W
WPR
WP91
W (Welded construction)
S (Seamless construction)
WP91W
WP91

SUPPLEMENTARY REQUIREMENTS
S1. Alternative Heat Treatment – Grade WP91 
S2. Restricted Vanadium Content 
S3. Carbon Equivalent

 

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


Different Types Of A234 WP11/ WP9 Alloy Steel Pipe Fittings at Discounted Price :

 

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India

 

ASTM A234 WP11/ WP9 Alloy Steel Pipe Fittings Latest Price List 2017-18

 

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Elbows

ASTM A234 WP11/ WP9 Alloy Steel Elbows manufacturers in India

Standard: ANSI B16.9 / 16.28, ASTM A53/A106, API 5L, ASME B36.10M-1996, DIN2605 / 2615 / 2616, 
JIS P2311/2312
Thickness: SGP, STD, SCH40, SCH80, SCH160. XS, XXS and so on.
Size: 1/2"–72"
Material: ASTM A234 WP11/ WP9 ElbowA234 WP11/ WP9 Elbow, Alloy Steel elbow, alloy steel elbow, stainless steel elbow
Surface treatment: Transparent oil, rust-proof black oil or hot galvanized.

Special design available All the production process are made according to ISO 9001:2008 strictly.
keyword: Elbow, Seamless Elbow, Steel Elbow, Alloy Steel Seamless Elbow, 45 degree elbow, pipe elbow

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Reducing Elbows

ASTM A234 WP11 Alloy Steel Reducing Elbows manufacturers in India

We are manufacturer of ASTM A234 WP11/ WP9 Reducing Elbows and supply high quality ASTM A234 WP11/ WP9 Reducing Elbows in both large and small quantities worldwide & offer you the best prices in the market.

Export packaging is geared towards the protection, handling and transport of ASTM A234 WP11/ WP9 Reducing Elbows by air or sea freight and, as such, shares many characteristics with export and transport packaging. Utmost care must also be taken to make overseas packaging suitable for long periods of storage. It is important for overseas packaging to be designed with ease of handling in mind, so as to ensure ASTM A234 WP11/ WP9 Reducing Elbows is treated with the utmost care at all times.

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A420 WPL6

 

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India

ASTM A234 WP11/ WP9 Alloy Steel 45° Elbows

ASTM A234 WP11 Alloy Steel 45° Elbows manufacturers in India

Looking for ASTM A234 WP11/ WP9 Elbows in specific standards & size at Factory Rate?

We are manufacturer of ASTM A234 WP11/ WP9 Elbows and supply high quality ASTM A234 WP11/ WP9 Elbows in both large and small quantities worldwide & offer you the best prices in the market.

The sizes:
Elbow: DN15~DN3600

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers

 


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Tee fitting

ASTM A234 WP11 Alloy Steel Tee fitting manufacturers in India

Looking for ASTM A234 WP11/ WP9 TEE, Reducing TEE, ASTM A234 WP11/ WP9 Straight TEE in specific standards & size at Factory Rate?

Tee pipe fitting manufacturers

We are manufacturer of ASTM A234 WP11/ WP9 Reducing TEE, ASTM A234 WP11/ WP9 Straight TEE and supply high quality ASTM A234 WP11/ WP9 Reducing TEE & ASTM A234 WP11/ WP9 Straight TEE in both large and small quantities worldwide & offer you the best prices in the market.

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers

 


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Reducers

ASTM A234 WP11 Alloy Steel Reducers manufacturers in India

ASTM A234 WP11/ WP9 Reducers – Concentric & Eccentric Reducers

Looking for ASTM A234 WP11/ WP9 Reducers in specific standards & size at Factory Rate?

We are manufacturers of ASTM A234 WP11/ WP9 Reducers and supply high quality ASTM A234 WP11/ WP9 Reducers in both large and small quantities worldwide & offer you the best prices in the market.

We can also offer customized packaging for ASTM A234 WP11/ WP9 Reducers as per customer’s requirement.

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers

 


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Stub Ends

ASTM A234 WP11 Alloy Steel Stub Ends manufacturers in India

Buy directly from Alloy Steel stub end manufacturers. Alloy Steel Stub Ends are manufactured in all standard wall thicknesses. Normal production items are manufactured in ASA-A (Long Pattern) in Standard and Extra Heavy wall thickness. MSS-A (Short Pattern) Stub Ends are also available in Alloy Steel in all wall thicknesses. Both ASA-A and MSS-A patterns are used with lap joint flanges., stub end manufacturers

Materials: Alloy Steel: A 106 Grade B Seamless
Sizes: 1/2” thru 24”
Schedules: All Schedules

ASTM A234 WP11/ WP9 Fittings End Prep:

  • Beveled Ends
  • Squared Ends
  • Flanged Ends
  • Victaulic Grooves
  • Threaded Ends (Male Only)

Lengths:

  • ASA-A Standard
  • MSS-A and other special lengths available

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers

 


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel End Caps

ASTM A234 WP11 Alloy Steel End Caps manufacturers in India

Standard: ANSI B16.9 / 16.28, ASTM A53/A106, API 5L, ASME B36.10M—1996, DIN2605 / 2615 / 2616, JIS P2311/2312
Thickness: SGP, STD, SCH40, SCH80, SCH160. XS, XXS and so on.
Size: 1/2"–80"
Material: Carbon steel, alloy steel, stainless steel
Surface treatment: Transparent oil, rust-proof black oil or hot galvanized.
keyword: cap, Seamless cap, Steel cap, Alloy Steel Seamless cap, pipe cap, cap end

  • Seamless cap
  • Erw cap
  • large size cap
  • small size cap

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Cross Fitting

ASTM A234 WP11 Alloy Steel Reducing Cross Fitting manufacturers in India

Pipe cross manufacturers in India

Standard: ANSI B16.9 / 16.28, ASTM A53/A106, API 5L, ASME B36.10M—1996, DIN2605 / 2615 / 2616, JIS P2311/2312
Thickness: SGP, STD, SCH40, SCH80, SCH160. XS, XXS and so on.
Size: 1/2"–60"
Material: Carbon steel, alloy steel, stainless steel
Surface treatment: Transparent oil, rust-proof black oil or hot galvanized.

  • Seamless cross
  • Erw cross
  • pipe cross
  • Alloy Steel cross

keyword:cross, Seamless cross, Steel cross, Alloy Steel Seamless cross, pipe cross

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers

 


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Reducing Cross Fitting

ASTM A234 WP11 Alloy Steel Reducing Elbows manufacturers in India

Product: Buttweld Reducing Cross

Sizes: 1/2” TO 36” (SEAMLESS UPTO 24”) (WELDED 8” TO 36” )

Standards: ANSI – B 16.9
ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’
API 590-605
ASME B16.9 – ‘Factory-Made Wrought Buttwelding Fittings’
ASME B16.25 – ‘Buttwelding Ends’
ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’
MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications’

Schedule: Sch 5 TO Sch XXS.

Thickness: Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.

Type: Buttweld (BW)

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel 180° SR Return Bend

ASTM A234 WP11 Alloy Steel 180° SR Return Bend manufacturers in India

Product: Buttweld 180° Short Radius Elbow

Sizes: 1/2” TO 36” (SEAMLESS UPTO 24”) (WELDED 8” TO 36” )

Standards: ANSI – B 16.9
ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’
API 590-605
ASME B16.9 – ‘Factory-Made Wrought Buttwelding Fittings’
ASME B16.25 – ‘Buttwelding Ends’
ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’
MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications’

Schedule: Sch 5 TO Sch XXS.

Thickness: Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc.

Type: Buttweld (BW)

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Pipe Bend / Piggable Bend

ASTM A234 WP11 Alloy Steel Pipe Bend / Piggable Bend manufacturers in India

RANGE :
2"NB TO 18"NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

TYPE :
SEAMLESS / WELDED/ FABRICATED

Form : Long radius Bend, Piggable Bend, Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend

Offer : Minimum Wall Thinning rate & Ovality, No Wrinkles
Piggable Bend

Alloy Steel Piggable Bend
ASTM A 234 WP-P5, P9, P11, P12, P21, P22 & P91

Alloy Steel Piggable Bend 
ASTM A 234 WPB,

Low Temperature Alloy Steel Piggable Bend 
ASTM A 234 WPB

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Long Radius Bend

ASTM A234 WP11 Alloy Steel Long Radius Bend manufacturers in India

RANGE :
2"NB TO 18"NB IN SCH: 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
TYPE :
SEAMLESS / WELDED/ FABRICATED

Form : Long radius Bend, Piggable Bend, Hot bend, With R=3D, 5D, 6D, 8D, 10D & Customized Bend

Offer : Minimum Wall Thinning rate & Ovality, No Wrinkles

Alloy Steel 3D Bend
ASTM A 234 WP-P5, P9, P11, P12, P21, P22 & P91

Alloy Steel 3D Bend 
ASTM A 234 WPB,

Low Temperature Alloy Steel 3D Bend 
ASTM A 234 WPB

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Couplings

ASTM A234 WP11 Alloy Steel Couplings manufacturers in India

OUR EXPORT MARKET: Dubai, UAE, Malaysia, South Africa, Iran, Singapore, Canada, Colombia

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Pipe Nipples

ASTM A234 WP11 Alloy Steel Pipe Nipples manufacturers in India

OUR EXPORT MARKET: Dubai, UAE, Malaysia, South Africa, Iran, Singapore, Canada, Colombia

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers

How find us: pipe nipple suppliers in UAE,
pipe nipple suppliers,
steel pipe nipple manufacturers,
pipe nipple manufacturers,
pipe nipple manufacturers in india


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Forged /Plate Cut Rings

ASTM A234 WP11 Alloy Steel Forged /Plate Cut Rings manufacturers in India

OUR EXPORT MARKET: Dubai, UAE, Malaysia, South Africa, Iran, Singapore, Canada, Colombia

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel 180° LR Return Bend

ASTM A234 WP11 Alloy Steel 180° LR Return Bend manufacturers in India

OUR EXPORT MARKET: Dubai, UAE, Malaysia, South Africa, Iran, Singapore, Canada, Colombia

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Forged / Plate Circles

ASTM A234 WP11 Alloy Steel Forged / Plate Circles manufacturers in India

OUR EXPORT MARKET: Dubai, UAE, Malaysia, South Africa, Iran, Singapore, Canada, Colombia

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11/ WP9 Pipe Fittings Manufacturers


ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Alloy Steel Lateral

ASTM A234 WP11 Alloy Steel Lateral manufacturers in India

OUR EXPORT MARKET: Dubai, UAE, Malaysia, South Africa, Iran, Singapore, Canada, Colombia

TEST CERTIFICATE 
Mill Test Certificate as per EN 10204 / 3.1B

Lateral tee pipe fitting manufacturers, reducing lateral tee dimensions

Grade Specification: Alloy Steel: ASTM/ASME A234 WPB / A860 – MSS-SP-75 WPHY 42 / 46 / 52 / 56 / 60 / 65 / 70 Low temperature Steel: A420 WPL3 / A234 WP11 Pipe Fittings Manufacturers, asme b16.9 lateral tee manufacturer, 45 degree lateral pipe fitting manufacturers

 

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India

 

Chemical Composition (%) of A234 WP1/ WP5/ WP9/ WP11/ WP22 / WP91 Fittings

Grade C Mn P S Si
WPB
0.3
0.29-1.06
0.05
0.058
0.1min
WPC
0.35
0.29-1.06
0.05
0.058
0.1min
WP11 CL1
0.05-0.15
0.30-0.60
0.03
0.03
0.50-1.00
WP11 CL2/3
0.05-0.20
0.30-0.80
0.04
0.04
0.50-1.00


Grade Cr Mo Ni Cu V Nb
WPB
0.4
0.15
0.4
0.4
0.08
0.02
WPC
0.4
0.15
0.4
0.4
0.08
0.02
WP11 CL1
1.00-1.50
0.44-0.65
WP11 CL2/3
1.00-1.50
0.44-0.65

 

 

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


Mechanical properties of A234 WP1/ WP5/ WP9/ WP11/ WP22 / WP91 Fittings

Tensile Requirements WPB WPC, WP11CL2 WP11CL1 WP11CL3
Tensile Strength, min, ksi[MPa]
60-85
70-95
60-85
75-100
(0.2% offset or 0.5% extension-under-load)
[415-585]
[485-655]
[415-585]
[520-690]
Yield Strength, min, ksi[MPa]
32
40
30
45
[240]
[275]
[205]
[310]

Where the wall thickness lies between two values above, the min elongation value is determined by the following equations:

Longitudinal E=48t+15.00
Transverse E=32t+10.00
E = elongation in 2in [50mm], %
t = actual thickness of specimen, in [mm]

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India

 

Application of A234 WP1/ WP5/ WP9/ WP11/ WP22 / WP91 Pipe Fittings :

  • Industrial Boilers
  • Power Plants
  • Nuclear Plants
  • Oil & Gas Industry
  • Refineries
  • Ship Building
  • Heat Exchangers
  • Condensers
  • Paper & Pulp
  • Marine Applications
  • Nuclear Power
  • Fossil Fuel Power Plant

 

Cities We Deliver To :

Pimpri-Chinchwad(maharashtra)
Haryana(india)
Ulsan(South Korea)
Toronto(Canada)
Houston(USA)
Dallas(Texas)
Bhopal(india)
Bogota(Colombia)
Dubai(UAE)
Moscow(Russia)
Surat(Gujarat)
Los Angeles(California)
Seoul(South Korea)
Ludhiana(Punjab)
Madrid(Spain)
Faridabad(Haryana)
Hyderabad(Andhra Pradesh)
Visakhapatnam(Andhra Pradesh)
Dammam(Saudi Arabia)
La Victoria(Venezuela)
Vadodara(Gujarat)
Courbevoie(France)
Kuala Lumpur(Selangor)
Lahore(Pakistan)
Abu Dhabi(United Arab Emirates)
Manama(Bahrain)
Indore(Madhya Pradesh)
Melbourne(Victoria)
Pune(Maharashtra)
Montreal(Canada)
Chandigarh(Punjab)
Rio de Janeiro(Brazil)
Kolkata(West Bengal)
Vung Tau(Vietnam)
Busan(South Korea)
Santiago(Chile)
Gurgaon(Haryana)
Al Khobar(Saudi Arabia)
Algiers(Algeria)
Perth(Australia)
Navi Mumbai(Maharashtra)
Caracas(Chacao)
Muscat(Oman)
Geoje-si(South Korea)
Ahmedabad(Gujarat)
Granada(Spain)
Sharjah(UAE)
Cairo(Egypt)
Tehran(Iran)
Ahvaz(Iran)
Thane(Maharashtra)
Aberdeen(Washington)
Calgary(Alberta)
Karachi(Pakistan)
Istanbul(Turkey)
Jeddah(Saudi Arabia)
Noida(Uttar Pradesh)
New York(United States)
Bangkok(Thailand)
Doha(Qatar)
Riyadh(Saudi Arabia)
Sydney(South Wales)
Bengaluru(Karnataka)
Rajkot(Gujarat)
London(United Kingdom)
Chiyoda(Tokyo)
Chennai(Tamil Nadu)
Brisbane(Queensland)
Coimbatore (Tamil Nadu)
Ankara(Turkey)
Atyrau(Kazakhstan)
Milan(Italy)
Hanoi(Vietnam)
Howrah(West Bengal)
Port-of-Spain(Trinidad and Tobago)
Thiruvananthapuram(Kerala)
Lagos(Nigeria)
Al Jubail(Saudi Arabia)
Petaling Jaya(Malaysia)
Ernakulam(Kerala)
Gimhae-si(South Korea)
Secunderabad(Hyderabad)
New Delhi
Mumbai (maharashtra)
Jakarta(Indonesia)
Ho Chi Minh City(Vietnam)

 

ASTM A403 Stainless Steel Pipe Fittings Manufacturers In India


Countries We Deliver To :

 UAE
Thailand
Australia
Hungary
Portuga
Angola
Argentina
Austria
Azerbaijan
China
Bangladesh
Belgium
Bhutan
Gabon
Bolivia
Bulgaria
Mozambique
Slovakia
Hong Kong
Philippines
Finland
Greece
Italy
Yemen
Japan
iraq
Romania
Algeria
New Zealand
Chile
 
Venezuela
Sudan
Poland
Kenya
Pakistan
Oman
Chile
Spain
Mongolia
France
Netherlands
Brazil
Nigeria
Morocco
Sweden
Kuwait
Mexico
Colombia
Egypt
Afghanistan
Serbia
Ghana
Taiwan
Switzerland

ASTM A234 WP5/ WP9/ WP11/ WP91 Fittings Manufacturers In India


ASTM A234 WP11/ WP9 Material, ASTM A234 Weld Fittings, Source for A234 WP11/ WP9 Pipe Fittings, specialize in A234 WP11/ WP9 Pipe Fittings, A234 WP11/ WP9 Pipe Fittings with Mill & Test Certificate, wide range of A234 WP11/ WP9 Pipe Fittings, ASTM A234 WP11/ WP9, ASTM A234 WP5 FITTINGS, ASTM A234 WP11 Fittings manufacturer, ASTM 234 WP22 FITTINGS, ASTM A234 WP91 Pipe Fittings suppliers, ASTM A234 WP5, WP9, WP11, WP22, WP91 Seamless Alloy Steel Buttweld Pipe Fittings manufacturers in India, ASTM A234 Wp11 Fittings, ASTM A234 WP11/ WP9 Elbow, ASTM A234 WP11/ WP9 Cap, A234 WP11/ WP9