Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

Alloy Steel Pipe Fittings Manufacturers in India

Manufacturer of Ibr Alloy Steel Pipe Fittings in Mumbai, India, 4140 Alloy Steel Fitting Suppliers.

Check Chromoly Pipe Fittings & Alloy Steel Fittings Price List of Alloy Steel Fittings manufacturer in India.


Indian Boiler Regulation 353 B states that the material used to produce alloy steel flanges, that are either forged, cast or cut from plates must be made from the steel produced by either using the  Open Hearth process or the Electric process. The exception to this regulation are branches that have been forged integral with the pipes.


Alloy Steel Pipe Fittings Manufacturers in India

Ibr Alloy Steel Pipe Fittings like Flanges, must be manufactured without a weld. The  Alloy Steel Weld Fittings manufacturers should also ensure that these fittings be free from lamination  as well as other defects. The material used to produce the Low Alloy Steel Fittings should comply to all the aspects with regards to the requirements of Regulation 234. The material for Alloy Steel Buttweld Fittings is to be similar as that of the pipes to which they are being attached. Alloy Steel Pipe Fittings manufacturers in India have designed  the fittings in such a way that they are to be withstand the total stress induced in them. The stress induced in these fittings should not exceed the maximum permissible stress as determined by the criteria laid down under Regulation 271.



Alloy Steel Pipe Fittings Manufacturers in India

Alloy Steel Pipe Fittings

Alloy Steel Forged Fittings Suppliers In Mumbai

Alloy Steel Forged Fittings

Alloy Steel Buttweld Fittings Distributor In Saudi Arabia

Alloy Steel Buttweld Fittings

4130 Alloy Steel Pipe Fitting manufacturers, 4135 Alloy Steel Weld Fitting Exporter in India, 4137 Alloy Steel Hydraulic Fittings supplier, 4142 Alloy Steel Fittings Price List in Mumbai.


What is Alloy Steel Pipe Fittings?


The Alloy Steel Forged Fittings are available in various thickness  or Schedule as follows -  Sch 40 / Sch 80 / Sch 100 / Sch 120 / Sch 160 / Sch XXS. While the size as created by the Alloy Steel Fittings manufacturer is as follows - 1/2 inch, 3/4 inch, 1 inch , 2 inch, 3 inch. Almost every Alloy Steel Fittings supplier will recommend that these fittings be used in applications such as Gas Pipe, Chemical Handling Pipe, Drinking Water Pipe as well as Power Industries. Alloy steel fittings can be used in these industries due to their excellent performance in terms of their features and long service life.


AS Fittings Price List in India


SR. NO. DESCRIPTION NOS PRICE PER PICE IN US($)
1 ELBOW BW, 90 D. LR, SIZE: 4"SCH. 40 AS EA $23.81
2 CONC. RED. SIZE: 3"X 2" SCH. 80 AS EA $11.71
3 CONC. RED. SIZE: 3"X 2" SCH. 40 AS EA $8.93
4 ECC. RED. SIZE: 3"X 2" SCH. 80 AS EA $13.89
5 CONC. RED. SIZE: 3"X 1.5" SCH. 80 AS EA $13.89
6 ECC. RED. SIZE: 3"X 1.5" SCH. 80 AS EA $16.87
7 ELBOW BW, 90 D. LR, SIZE: 2" SCH. 80 AS EA $7.94
8 ELBOW BW, 90 D. LR, SIZE: 3" SCH. 80AS EA $17.86
9 ELBOW BW, 90 D. LR, SIZE: 4" SCH. 80 AS EA $35.71
10 ELBOW BW, 90 D. LR, SIZE: 6" SCH. 80 AS EA $89.29
11 ELBOW BW, 90 D. LR, SIZE: 3"SCH. 40 AS EA $10.91
12 ELBOW BW, 90 D. LR, SIZE: 4"SCH. 40 AS EA $23.81

Please note this is an approx Price of Ibr Alloy Steel Fittings in India. For final A234 Alloy Steel FittingsPrice List Please Call on +91 22 66109735 or drop an Email to sales@skylandmetal.in.


Alloy Steel Forged Fittings Specification


Alloy Steel Type 360LT

  • A694 Grade FWP11 Forging
  • A860 Grade ASTM A234 WP11 Fittings
  • API 5L Grade XWP11 Seamless Pipe

Material Size (mm) SCH/ Class Thickness Specification Manufacturing Method
Alloy Steel Pipe Fittings
15NB to 600NB
SCH 40 to XXS
3.91 to 60mm
A234 WP
Seamless
200NB to 1800NB
SCH 10, 20, 30, 40, 80
6.35 to 60mm
A234 WP
Welded

ASTM A234 WP equivalent
A234 WP
A860 Grade ASTM A234 WP Fittings
A694 ASTM A234 WP
A694 Grade FWP Flanges
A234 ASTM A234 WP
A234 Grade WPB Alloy Steel Fittings
A234 AISI 4130 High Strength Low Alloyed Steel Fittings

Prestige quality Alloy Steel Pipe Fittings manufacturers in India offer these Ibr Alloy Steel Pipe Fittings in EN, DIN, ISO, BS, JIS or ANSI standard.


Grade Specification
Carbon Steel: ASTM/ASME A234/ SA234
ASTM A234 WP Fittings Size
Seamless:from 1/2" to 24"
Welded:from 24" to 96"
(or as customer requirements)
ASTM A234 WP Fittings Degree
22.5 deg, 30deg,45 deg,90 deg,180 deg,
1.0D, 1.5D, 2.0D, 2.5D, 3D,4D,5D,6D,7D-40D.
ASTM A234 WP Fittings Thickness
SCH10, SCH20, SCH30, STD SCH40,
SCH60, XS, SCH80., SCH100,
SCH120, SCH140, SCH160, XXS
Standard
ASME B16.9, ASME B16.25, MSS SP-75
DIN2605 JISB2311 JISB2312 JISB2313,
BS, GB, ISO
Alloy Steel Material
Alloy Steel
(ASTM A234 WPB, A234WPC, A420 WPL6, etc)
Stainless steel
(ASTM A403 WP304, 304L, 316, 316L, 321,etc)
Alloy steel
(ASTM A234 WP12, WP11, WP22, WP5, WP9, WP91, etc)
ASTM A234 WP11 Fittings Type
Seamless / Welded / Fabricated
ASTM A234 WP Fittings Bending Radius
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
ASTM A234 WP Fittings Range

½" NB to 48" NB in Sch 10s, 40s, 80s, 160s, XXS.
From 1/2 to 30 (Seamless Pipe Fittings), Form16 to 100 (Seam Pipe Fittings)

Dimensions
ANSI/ASME B16.9, B16.28, MSS-SP-43.
Applicable Standards
1-ASME B 16.9 for large Bore
2-ASME B 16.11 for small Bore (socket welded)
3-ASME B 16.25 for butt weld ends
4-ASME B 16.28 for small radius elbow
Seamless/ Welded 100% Radiography Tested
Alloy Steel Pipe Fittings manufacturers in India

Skyland Metal & Alloys Inc. is an ISO certified Alloy Steel Pipe Fittings manufacturers in India & AS Weld Fittings distributor in Mumbai.


Standard Description
ASTM A182/A182M Forged or rolled alloy steel pipe flanges, forged fittings and valves and parts for high temperature service.
Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
ASTM A403/A403M Wrought austenitic stainless steel piping fittings.
ASTM A815/A815M Wrought ferritic, ferritic/austenitic and martensitic stainless steel piping fittings.
ANSI B16.9 Factory-made wrought steel butt-welding fittings.
ANSI B16.11 Forged steel fittings socket-welding and threaded.
Socket Welding and Threaded Forged Fittings
ANSI B16.25 Butt-welding ends.
MSS SP43 Wrought stainless steel butt-welding fittings.
Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
BS21 Threading.
ISO 4144 Stainless steel fittings threaded to ISO 7-1.
MSS SP-95 Swage(d) Nipples and Bull Plugs
BS3799 Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry
AS 2129 Flanges for pipes, valves and fittings
ANSI/ASME B1.20.1 Pipe threads, general purpose (inch).
ANSI B16.5 Steel pipe flanges and flanged fittings.
ANSI – B 16.9
ASTM A403 – ASME SA403

‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’

API 590-605
ASME B16.9
‘Factory-Made Wrought Buttwelding Fittings’
ASME B16.25 ‘Buttwelding Ends’
ASME B16.28 ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’

Skyland Metal & Alloys Inc. is a Alloy Steel Pipe Fittings manufacturers in India, and supplier of offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.


ASTM A234/ A234M-10

Grade Class Construction Mandatory Marking
WPB
W (Welded)
S (Seamless)
WPBW
WPB
WPC
W (Welded)
S (Seamless)
WPCW
WPC
WP1
W (Welded)
S (Seamless)
WP1W
WP1
WP12
CL1
CL2
W (Welded)
S (Seamless)
WP12 CL1W
WP12 CL1
WP12 CL2W
WP12 CL2
WP11
CL1
CL2
CL3
W (Welded)
S (Seamless)
WP11 CL1W
WP11 CL1
WP11 CL2W
WP11 CL2
WP11 CL3W
WP11 CL3
WP22
CL1
CL3
W (Welded)
S (Seamless)
WP22 CL1W
WP22 CL1
WP22 CL3W
WP22 CL3
WP5
CL1
CL3
W (Welded)
S (Seamless)
WP5 CL1W
WP5 CL1
WP5 CL3W
WP5 CL3
WP9
CL1
CL3
W (Welded)
S (Seamless)
WP9 CL1W
WP9 CL1
WP9 CL3W
WP9 CL3
WPR
W (Welded)
S (Seamless)
WPR W
WPR
WP91
W (Welded)
S (Seamless)
WP91W
WP91

Skyland Metal & Alloys Inc. is a Govt. approved certified Alloy Steel Pipe Fittings manufacturers in India, We have our AS Weld Fittings distributor and wholesaler in Malaysia, AS Tube Fittings for Indonesia, AS Hydraulic Fittings for Singapore, United Arab Emirates (UAE) & South Africa. We are well-known as a trusted Manufacturer of Chromoly Pipe Fittings in Mumbai, India.


Alloy Steel Buttweld Fittings Type


Alloy Steel Piggable Bend

Alloy Steel Piggable Bend

Chrome Alloy Steel Pipe Bends

Chrome Alloy Steel Pipe Bends

High Alloy Steel Lateral Tee

High Alloy Steel Lateral Tee


Skyland Metal & Alloys Inc. is a Alloy Steel Pipe Fittings manufacturers in India, offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, Thailand, Vietnam, Indonesia, Saudi Arabia (KSA), Singapore, Kuwait, Qatar, Philippines, United Arab Emirates (UAE), AS Tube Fittings for South Africa, UK, Oman, AS Compression Fittings for Bahrain. You can mail to sales@skylandmetal.in for AS Hydraulic Fittings to induce live quotes now. Looking to buy Chromoly Pipe Fittings at the best cost in India.


Alloy Steel Fittings Production Range


Alloy Steel Fittings Specification : ASTM A 234 / ASME SA 234
Alloy Steel Forged Fittings Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Alloy Steel Buttweld Fittings Types : Seamless / ERW / Welded / Fabricated
Low Alloy Steel Fittings Dimensions : ANSI/ASME B16.9, B16.28, MSS-SP-43.
Ibr Alloy Steel Pipe Fittings Size : 1/8" NB TO 48" NB (Seamless & Welded)
Alloy Steel Pipe Fittings manufacturers in India

Chrome Moly/Alloy Steel Forged Fittings Production Range


A234 Alloy Steel Fittings Grades Chrome Moly Grades P1, P5, P9, P11, P22, P91
Alloy Steel Fittings Range ½”NB to 48″NB in Sch 10s, 40s, 80s, 160s, XXS.
Low Alloy Steel Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43.
High Alloy Steel Type Seamless / Welded / Fabricated / Forged
Chromium Alloy Steel Specification A/SA234 WP1, WP5, WP9, WP11, WP22, WP91 | A/SA182 F1, F5, F9, F11, F22, F91
Cast Alloy Steel Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Alloy Steel Pipe Fittings manufacturers in India

High Pressure Forged Chrome Moly/ Alloy Steel Fittings


Chrome Moly Threaded and Socket Weld Pipe Fittings

Products Size
Alloy Steel Steel 90° Elbows Alloy Steel Couplings

Sizes 1/8″ – 4″

Pressure Ratings –

2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

Alloy Steel 45° Elbows Alloy Steel Reducers
Alloy Steel Street Elbows Alloy Steel Inserts
Alloy Steel Tees Alloy Steel Caps
Alloy Steel Crosses Alloy Steel Unions
Alloy Steel Pipe Fittings manufacturers in India

Alloy Steel Fittings Manufacturing Standards


  • MSS SP-43 Alloy Steel Buttweld Fittings– Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications
  • MSS SP-95 Low Alloy Steel Fittings– Swage(d) Nipples and Bull Plugs
  • BS3799 –Specification for Steel pipe fittings, screwed and Socket-welding for the petroleum industry
  • ASTM A182 Ibr Alloy Steel Fittings– ASME SA182 – Standard Specification for Wrought Austenitic Alloy steel Piping Fittings
  • ASME B16.9 A234 Alloy Steel Pipe Fitting– Factory-Made Wrought Buttwelding Fittings
  • ASME B16.11 Alloy Steel Fittings– Forged Fittings, Socket – Welding and Threaded

  • Other Available Products Of Alloy Steel Fittings / Alloy Steel Forged Fittings / Alloy Steel Buttweld Fittings


    • Alloy Steel A234 WP Equal Cross
    • Alloy Steel A234 WP 1.5D Elbow
    • Alloy Steel A234 WP Reducing Cross
    • A234 WP Reducing Outlet Tees and Crosses
    • ASTM A234 WP 90 Long Radius Elbow
    • Alloy Steel Concentric Reducer
    • AS 90° Short Radius Elbow
    • Alloy Steel A234 WP Reducer
    • A234 WP 180° Long Radius Elbow
    • Alloy Steel A234 WP End Cap
    • A234 WP 45° Long Radius Elbow
    • ASTM A234 WP Eccentric Reducer
    • A234 WP 45° Long Radius Elbow
    • ASTM A234 WP Eccentric Reducer
    • Low Alloy Steel
    • High Alloy Steel
    • Chromium Alloy Steel
    • Cast Alloy Steel
    • Chrome Alloy Steel
    • Chromoly Alloy
    • Chromoly Steel Alloy
    • Chromoly 4130
    • Chromoly Aisi 4130
    • Aisi 4130 Chromoly Steel
    • Chromoly Material
    • 4130 (Chromoly) Annealed Alloy Steel
    • Alloy Steel Forged Fittings
    • A234 WP 1D Elbow
    • A234 WP Lap Joint Stub Ends
    • A234 WP 45° Short Radius Elbow
    • Alloy Steel A234 WP Lateral Tee
    • ASTM A234 WP 3D Elbow
    • Alloy Steel Stubend
    • ASTM A234 WP Reducing Tee
    • Alloy Steel A234 WP Short Stubend
    • A234 WP 5D Elbow
    • Alloy Steel A234 WP Long Stubend
    • A234 WP Pipe Cap
    • Alloy Steel A234 WP Collar
    • A234 WP Straight Tees and Crosses
    • A234 WP Straight Tees and Crosses
    • 4130 Chromoly
    • 4150 Chromoly Steel
    • Scm415 Chromoly
    • 4135 Chromoly Steel
    • 4137 Chromoly Steel
    • 4142 Chromoly Alloy Steel
    • 4142 Chromoly Steel
    • 4140 Low Alloy Steel
    • 4142 Chromoly Alloy Steel
    • Scm420 Chromoly Steel Alloy
    • 4130 (Chromoly) Normalized Alloy Steel
    • Alloy Steel Buttweld Fittings
    • Low Alloy Steel Fittings
    • Ibr Alloy Steel Pipe Fittings

    ASTM A234 Alloy Steel Buttweld Pipe Fittings Specification


    Alloy Steel Grade Alloy Steel Pipe Alloy Steel Tube Alloy Steel Fittings Alloy Steel Plate Alloy Steel Forgings
    1/2Mo A335 P1 A213 T1 A234 WP A182 F1
    5Cr-1/2Mo A335 P5 A213 T5 A234 WP5 A387 GRADE 5 A182 F5
    9Cr-1Mo A335 P9 A213 T9 A234 WP9 A387 GRADE 9 A182 F9
    1 1/4 Cr-1/2Mo A335 P11 A213 T11 A234 WP11 A387 GRADE 11 A182 F11
    2 1/4Cr-1Mo A335 P22 A213 T22 A234 WP22 A387 GRADE 22 A182 F22
    9Cr-1Mo-V-Nb A335 P91 A213 T91 A234 WP91 A387 GRADE 91 A182 F91

    Chemical Composition (%) of Low Alloy Steel Fittings


    Chemical Composition of ASTM A234 Alloy Steel Pipe Fittings(%)
    Grade C Mn P S Si Cr Mo Others
    WP1 0.28 0.30-0.90 0.045 0.045 0.10-0.50 - 0.44-0.65 -
    WP12 CL1, WP12 CL2 0.05-0.20 0.30-0.80 0.045 0.045 0.60 0.80-1.25 0.44-0.65 -
    WP11 CL1 0.05-0.15 0.30-0.60 0.030 0.030 0.50-1.00 1.00-1.50 0.44-0.65 -
    WP11 CL2, WP11 CL3 0.05-0.20 0.30-0.80 0.040 0.040 0.50-1.00 1.00-1.50 0.44-0.65 -
    WP22 CL1, WP22 CL3 0.05-0.15 0.30-0.60 0.040 0.040 0.50 1.90-2.60 0.87-1.13 -
    WP24 0.05-0.10 0.30-0.70 0.020 0.010 0.15-0.45 2.20-2.60 0.90-1.10 *A
    WP5 CL1, WP5 CL3 0.15 0.30-0.60 0.040 0.030 0.50 4.0-6.0 0.44-0.65 -
    WP9 CL1, WP9 CL3 0.15 0.30-0.60 0.030 0.030 1.00 8.0-10.0 0.90-1.10 -
    WPR 0.20 0.40-1.06 0.045 0.050 - - - *B
    WP91 0.08-0.12 0.30-0.60 0.020 0.010 0.20-0.50 0.85-1.05 0.85-1.05 *C
    WP911 0.09-0.13 0.30-0.60 0.020 0.010 0.10-0.50 0.90-1.10 0.90-1.10 *D
    WP92 0.07-0.13 0.30-0.60 0.020 0.010 0.50 0.30-0.60 0.30-0.60 *E
    • *All values listed are maximum unless a range is provided or otherwise specified.
    • *A – Cu:0.75-1.25,Al:≤0.020,B:0.0015-0.0070,N:≤0.12,Ti:0.06-0.10,V:0.20-0.30. *B – Ni:1.60-2.24,Cu:0.75-1.25.
    • *C – Ni:≤0.40,V:0.18-0.25,Co:0.06-0.10,N:0.03-0.07,Al:≤0.02,Ti:≤0.01,Zr:≤0.01.
    • *D – Ni:≤0.40,V:0.18-0.25,Co:0.06-0.10,N:0.04-0.09,Al:≤0.02,B:0.003-0.006,W:0.90-1.10,Ti:≤0.01,Zr:≤0.01.
    • *E – Ni:≤0.40,Al:≤0.02,B:0.001-0.006,Co:0.04-0.09,N:0.03-0.07,Ti:≤0.01,W:1.50-2.00,V:0.15-0.25,Zr:≤0.01.
    • *The unit “%” shall be applied to the chemical composition values from *A to *E.

    Are you looking Genuine Alloy Steel Pipe Fittings manufacturers in India?

    Skyland metal is manufacturer of Low Alloy Steel Fittings and Ibr Alloy Steel Pipe Fittings in Mumbai and Gujarat since year 2004, with the experience of 15 years as a manufacturer of welded fittings we have gained vast experience in worldwide export specially in Abu Dhabhi, Malaysia, Indonesia and many more countries. the advantage to buy material directly from manufacturer is to get the genuine material, Proper test report and save cost atleast 10-15%, aslo manufacturer is always stand behind the product. skyland metal is not only the normal manufacturer, we are the PED approved Alloy Steel Pipe Fittings manufacturers in India. our produced fittings and flanges are installed in world class pipeline. we also approved by PIDMCO.


    Mechanical properties of Alloy Steel Forged Fittings


    Mechanical Properties of ASTM A234 Alloy Steel Pipe Fittings
    Grade Tensile Strength, min. ksi[MPa] Yield Strength, min. ksi[MPa] Elongation, min. %
    Longitudinal Transverse
    WP1 55-80[380-550] 30[205] 20 13
    WP12 CL1 60[415] 32[220] 22 14
    WP12 CL2 70[485] 40[275] 22 14
    WP11 CL1 60[415] 30[205] 22 14
    WP11 CL2 70[485] 40[275] 22 14
    WP11 CL3 75[520] 45[310] 22 14
    WP22 CL1 60[415] 30[205] 22 14
    WP22 CL3 75[520] 45[310] 22 14
    WP24 85[585] 60[415] 20 -
    WP5 CL1 60[415] 30[205] 22 14
    WP5 CL3 75[520] 45[310] 22 14
    WP9 CL1 60[415] 30[205] 22 14
    WP9 CL3 75[520] 45[310] 22 14
    WPR 63-99[435-605] 46[315] 20 -
    WP91 90[620] 60[415] 20 13
    WP911 90-120[620-840] 64[440] 20 13
    WP92 90-120[620-840] 64[440] 20 13

    Where the wall thickness lies between two values above, the min elongation value is determined by the following equations:

    Longitudinal E=48t+15.00
    Transverse E=32t+10.00
    E = elongation in 2in [50mm], %
    t = actual thickness of specimen, in [mm]


    We are one of leading Importer, Exporters Of Low Alloy Steel Fittings In India.


    • Alloy Steel 90 Deg Long Radius Elbow
    • Alloy Steel 90 Deg Short Radius Elbow
    • Alloy Steel 45 Deg Long Radius Elbow
    • Alloy Steel 45 Deg Short Radius Elbow
    • Alloy Steel 180 Deg Long Radius Elbow
    • Alloy Steel 180 Deg Short Radius Elbow
    • Alloy Steel Equal Tee
    • Alloy Steel Reducing Tee
    • Alloy Steel Concentric/Eccentric Reducer
    • Alloy Steel Cross
    • Alloy Steel Straight Cross
    • Alloy Steel Reducing Cross
    • Alloy Steel Concentric Reducer
    • Alloy Steel Eccentric Reducer
    • Alloy Steel Stub End
    • Alloy Steel End Cap/ Pipe Cap
    • Alloy Steel Pipe Elbow
    • Alloy Steel Pipe Tee
    • Alloy Steel Pipe Cross
    • Alloy Steel Pipe Reducer
    • Alloy Steel Pipe End Cap
    • Alloy Steel Pipe Bends
    • Alloy Steel Lap Joint
    • IBR Approved Buttweld Fittings
    • Alloy Steel Piggable Bend
    • Alloy Steel Lateral Tee

    We do Alloy Steel Pipe Fittings Cutting, bevelling, turning, blasting, coating and marking for all requirements according to customer specification. All Alloy Steel Fittings Schedules in acc. with ASME B 36.10 / 36.19


    Other Type Of Alloy Steel Pipe Fittings Manufacturers in India


    4140 Alloy Steel Fitting 4130 Alloy Steel Pipe Fitting
    4135 Alloy Steel Weld Fitting 4137 Alloy Steel Hydraulic Fittings
    4142 Alloy Steel Fittings 4150 Alloy Steel Pipe Fittings
    4140 Low Alloy Steel Weld Fittings 4145 Alloy Steel Tube Fittings
    High Alloy Steel Fittings Aerospace Alloy Steel Fittings
    Low Alloy Steel Fittings Alloy Steel Pipe Fittings
    Alloy Steel Weld Fittings Alloy Steel Weld Fittings
    Ibr Alloy Steel Pipe Fittings Alloy Steel Pipe Fitting
    AS Fittings Chromoly Fittings
    Chromoly Pipe Fittings AS Hydraulic Fittings
    AS Tube Fittings AS Compression Fittings
    AS Fittings Aerospace Ibr Alloy Steel Pipe Fittings

    Our Client Reference In WorldWide


    Kakinada Petrochemical Cluster Project, Andhra Pradesh

    Kakinada Petrochemical Cluster Project, Andhra Pradesh
    Godavari, Andhra Pradesh

    Refinery and Petrochemical Integrated Development (RAPID)

    Refinery and Petrochemical Integrated Development (RAPID), Malaysia
    Pengerang, Malaysia

    ExxonMobil’s Singapore Refinery, Singapore <br />

    ExxonMobil’s Singapore Refinery, Singapore
    Jurong, Singapore

    Ras Tanura Refinery, Saudi Arabia

    Ras Tanura Refinery, Saudi Arabia
    Jubail, Saudi Arabia

    Offshore Gas Field Expansion, Qatar

    Offshore Gas Field   Expansion, Qatar
    Qatar Peninsula, Qatar

    JG Summit Petrochemical Complex Expansion, Philippines

    JG Summit Petrochemical Complex Expansion, Philippines
    Batangas City, Philippines

    Rayong Refinery Construction, Thailand

    Rayong Refinery Construction, Thailand
    Rayong, Thailand

    Korea Western Power Taean, South Korea

    Korea Western Power Taean
    831 Bangal-ri, Wonbuk-myeon, Taean-gun, Chungcheongnam-do, South Korea

    Caorso Nuclear Power Plant, Italy

    Caorso Nuclear Power Plant
    Località Zerbio, Via Enrico Fermi, 5/a, 29012 Caorso PC, Italy

    TECHNIP SPA SAUDI ARAMCO, SAUDI ARABIA

    TECHNIP SPA SAUDI ARAMCO
    JERP PACKAGE 2 – CONVERSION UNITS (SAUDI ARABIA)

    Nubaria Power Station In Egypt

    Nubaria Power Station In Egypt
    Kheneizah, Kom Hamada, El Beheira Governorate, Egypt

    Jurong Power Station In Singapore

    Jurong Power Station In Singapore
    16 Jurong Pier Rd, Singapore



    Looking for manufacturer of Alloy Steel Fittings in India? Buy from oldest Alloy Steel Weld Fitting in Mumbai. 4150 Alloy Steel Pipe Fittings, Low Alloy Steel Fittings stockholder, Alloy Steel Pipe Fittings Manufacturers in India.
    Exporter of Alloy Steel Pipe Fitting, 4140 Low Alloy Steel Weld Fittings Traders, B16.9 High Alloy Steel Fittings Aerospace stockist in UAE, 4145 Alloy Steel Tube Fittings dealer, MSS SP-43, MSS SP-79 AS Fittings Wholesaler. Buy Chromoly Fittings for Seamless and Welded connection, 4142 Chromoly Alloy Steel Compression Fittings/ Alloy Steel Pipe Fittings Manufacturers in India.

    We are Alloy Steel Pipe Fittings manufacturers in India. All of our 4135 Alloy Steel Weld Fitting is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc. We have our Manufacturing Unit and Dealers in Gujarat, 4137 Alloy Steel Hydraulic Fittings for Ahmedabad, Pune, Chennai, Indore, Kolkata, Delhi, Nagpur, Bhosari, Bangalore, 4150 Alloy Steel Pipe Fittings for Punjab, Ludhiana, Gurgaon, Rajkot, Karnataka, Uttar Pradesh, Faridabad, Khopoli, Madhya Pradesh, Jaipur, Ghaziabad, Haryana, Vadodara, West Bengal, 4142 Alloy Steel Fittings for Rajasthan, Raipur, Aurangabad, Kolhapur, 4140 Low Alloy Steel Weld Fittings for Chhattisgarh, Tamil Nadu, Karnataka.