Aluminium Flanges manufacturer in India
6061 Aluminum Blind Flanges and ASTM B247 UNS A93003 Slip on Flange supplier & exporter in Mumbai
Aluminum alloys have the benefit of being one of the lightest ones around. With a density lower than most traditionally used steel alloys, aluminum alloys are coveted for their low weight and moderate tensile strength properties. Because these alloys have very high ductility and are very soft, many Aluminium Flanges Manufacturers in India typically use different tempers on them. Tempering the material increases the tensile strength and improves the impact hardness, making it possible to use for applications that require high strength. Specifications like the ASTM B247 cover various tempers. And so the most common tempers mentioned in the ASTM B247 for the Aluminium Flanges include - T4, T6, T61, T7352, T7452, T73, T74, T7454, T852, T652, H112, and H111. Specifications usually cover essential points which act as a sort of guidelines, which help the manufacturer in producing accurate, standardized products like 3003-h112 And 6061-t6 Weld Neck Flange. This specification makes note of tests that are to be conducted on the components. It is typical for any component produced under ASTM specifications such as the ASTM B247 UNS A93003 Slip On Flange to undergo tests like chemical analysis, tension test, hardness test, and mechanical tests (yield and tensile strength, elongation & Brinell hardness). These tests determine the quality of the component produced, while also noting the conformance of the material’s chemical composition. The most common grades of Aluminum Pipe Flanges used in the market include 6082,6061, 5083, and 3003. Out of all these alloys, the most widely used component is the Aluminum 6061 Plate Flange because it offers good weldability and decent mechanical properties suited for general purpose applications.
Aluminium Flanges
Aluminium 6061 Blind Flange
Aluminium 5083 Slip On Flange
Alloy 5083 Weld Neck Flange and 6082 Aluminium Plate Flanges manufacturer in India
Table of contents
Standard specification of Aluminium Flanges
Check Aluminum Pipe Flanges Dimensions and Weight Chart in Kg as per DIN 2642, DIN 2673 and DIN 8063
| Material | Aluminium alloy EN AC-47000, aluminium alloy EN AB 47000 (EX UNI 7369), A96082, Grade 6061, 6063, 6082, 5083 |
| Supply conditions | Rough surfaces, Sand-blasted, Blank, Coated, blank (epossidic painting on request) |
| ASME B16.5 Aluminum Flange Sizes |
|
| Manufacturing Standard of Aluminium Flanges | B1503, KS MSS SP44, BS4504, EN-1092, GOST12820, ASME B16.47 Series A/B, API7S-43, UNI2276, ASME B16.5, JIS B2220, SABS1123, API7S-15, ISO70051, JISB2220, NFE29203, ASME B16.48, ASME B16.36, DIN, EN, BS10, DIN, API605, GOST, BS1560-3.1, BS, AWWA, ANSI |
| Types |
|
| Pressure Class of 6061 Aluminium Flanges | 900LBS, 1500LBS, 600LBS, 150LBS, 2500LBS, 300LBS |
| Aluminium flange hsn code | 7609 |
| Aluminium Flange Pressure Calculation in DIN/ UNI/ EN | 16Bar, 6Bar, 10Bar, 25Bar, 40Bar |
| JIS | 16K, 10K, 5K, 20K, 30K, 40K, 63K |
| PN | PN25, PN64, PN16, PN10, PN6, PN40 |
| Manufacturing types | Threaded, Screwed, Heat-treated, machined, Casting, Forged, Plate |
| Test Certificates provided by Aluminium Flanges manufacturers in India |
|
| Alloy 6082 Flange Face and Connect Types | Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Large Male-Female (LMF), Groove, Small Tongue, Lap-Joint Face (LJF), Small Male-Female (SMF), Large Tongue & Groove |
| Our distributors of Aluminium Flanges | Jaipur, Jakarta, Ahvaz, Riyadh, Houston, Ernakulam, Gurgaon, Agra, Port-of-Spain, Patna, Noida, Vadodara, Jamshedpur, Ahmedabad, Dammam, Surat, London, Manama, Dubai, Khobar, Calgary, Tehran, Kanpur, Mexico, Perth, Ludhiana, Abu Dhabi, Lucknow, Kuala Lumpur, Baroda, Pune, Kuwait, Nagpur, Karachi, Courbevoie, Thane, Shah Alam, Pimpri-Chinchwad, Nashik, Doha, India, Bangalore, Thiruvananthapuram, New Delhi, Ankara, Santiago, Indore, Rajkot, Caracas, Brisbane, Hyderabad, Bhubaneswar, Sharjah, Melbourne, Istanbul, Vapi, Vung Granada, Janeiro, Lagos, Navi Mumbai, Gujarat, Seoul, Kochi, Coimbatore, Howrah, Singapore, Muscat, Panipat, Mumbai, Bogota, Dhaka, Sydney, Kolkata, Mysuru, Montreal, Chennai, Tau, Gimhae-si, Bengaluru, Ranchi |
| Testing provided by Aluminium Flanges manufacturers |
|
Types of Aluminium Flanges
Manufacturer and supplier of UNS A96061/ A96082 Aluminum Tube Flange in Mumbai, India, get a free sample now
Aluminum Blind Flanges
Aluminium Threaded Flanges
6061 Aluminium Figure 8 Flanges
Alloy 6082 Socket Weld Flanges
Aluminum weld neck flanges
Aluminium A96061 Plate Flanges
5083 Aluminium Spade Flanges
DIN 3.3211 Slip On Flanges
Aluminum Orifice Flanges
6061 Aluminium Spacer Flanges
Aluminium Blank Flanges
Alloy 6082 Blank Flanges Rotatable
Aluminium Alloy 6063 Swivel Flanges
5083 Aluminium ANSI 150 Flanges
Aluminium A96061 Long Weld Neck Flanges
DIN 3.3211 Exhuast Flanges
Aluminum Welding Flanges Rotatable
6061 Aluminium Flanges with Tube
Aluminium CF (ConFlat) Flanges
Alloy 6082 Reducing Flanges
Aluminium Alloy 6063 Lap Joint Flanges
5083 Aluminium Flanges Bolted Weld-On
Aluminium A96061 Girth Flanges
DIN 3.3211 Spectacle Blind Flanges
AluminumL Anchor Flanges
Aluminium Screw Flanges
6061 Aluminium Square Flanges
Alloy 6082 Ring Joint Flanges
Aluminium Flange Dimensions
Manufacturer of Class 150/ 300 LBS Aluminium Alloy Floor, Vacuum, Forged, and Socket Weld Flanges in India, check latest price ex. Mumbai
| 6061 Aluminium Flanges Dimensions ‘DN’ (Nominal Diameter) in mm |
|||
|---|---|---|---|
| INCH | DN | INCH | DN |
| 1/2 | 15 | 12 | 300 |
| 3/4 | 20 | 14 | 350 |
| 1 | 25 | 15 | 375 |
| 1 1/4 | 32 | 16 | 400 |
| 1 1/2 | 40 | 18 | 450 |
| 2 | 50 | 20 | 500 |
| 2 1/2 | 65 | 24 | 600 |
| 3 | 80 | 28 | 700 |
| 4 | 100 | 30 | 750 |
| 5 | 125 | 32 | 800 |
| 8 | 200 | 36 | 900 |
| 10 | 250 | ||
Epoxy polyester powder coating for Aluminium Alloy Flanges
| Type of flange coating | EPOXI-POLYESTER |
| Composition | Epoxi-polyester powders |
| Mechanical properties of the coating | |
| Coating Thickness (ISO 2360) | 60 micron |
| Collision Resistance (ECCA T8) | > 2,5 Nm |
| Adherence (ISO 2409) | GT 0 |
| Hardness (EN ISO 2815) | > 90 |
| Bending (ISO 1519) | 5 mm |
| Shaping (ISO 1520) | > 3 mm |
| Brightness | 80 - 90 glos |
| Resistance to corrosion | |
| Demineralized water (ASTM D870) | 500 hours: no change |
| Saline fog (ASTM B117) | 500 hours (1 mm. of penetration on the cross) |
| Humidity resistance (IUNI 8744) | 500 hours: no change |
| Resistance to solvents | |
| Trichloroetane - Perchloroetane | Hard softening |
| Ethyl alcohol - Buthyl alcoh | No softening |
| Gasoline | No softening |
| Toluene - Xylene | Light softening |
| Methylethylketone - Acetone | Hard softening |
- Temperature of use: from -25°C to 50°C
- Standard colour: RAL 7031
Aluminium Flanges manufacturing standards
| ASME | Class 150 - 2500 |
| DIN | 6Bar 10Bar 25Bar 16Bar 40Bar |
| JIS | 1K - 63K |
| UNI | PN6-PN100 |
| EN1092-1 | 6Bar 16Bar 10Bar 25Bar 40Bar |
| AS2129 | Table A, D, E, F, H, J, K, R, S, T |
| AS4087 | PN16 PN35 PN21 |
Manufacturing range
ISO-METRIC TYPE |
Loose aluminium flanges for pipes with collars. Dimension as per EN 1092-1/02 PN 10 and, DN150, PN16 standards. These flange Inside diameter fit for metric and ISO pipes with thickness from 1 to 3 mm. |
TP-TYPE (for PE/PVC pipes) |
Loose aluminium flanges for PVC/ PE pipes with collars. |
LITE TP-TYPE |
Lap-joint aluminium flanges with collars. fit for plastic (PE) pipes. |
LITE TYPE ISO-METRIC |
Loose aluminium flanges for pipes with collars. Fit for ISO or metric standard pipes |
FF-ANSI 150 TYPE |
Loose (lap joint) aluminium flanges for pipes with collars. fit for pipes according to ISO standards |
PN6 TYPE |
Loose aluminium flanges for pipes with collars, EN 1092-1/02 PN6 standards |
BLIND TYPE |
Blind aluminium flanges, EN 1092-1/05 PN10 standards |
BLIND PN16 TYPE |
Blind aluminium flanges, UNI 6093 PN16 |
FF-BG PN10 TYPE |
Threaded aluminium flanges, EN 1092-1 PN10/16 standards, threaded acccording to ISO 228/1 or NPT ac- cording to ANSI/ASME B1.20.1. |
FF-G PN10 TYPE |
Threaded aluminium flanges, EN 1092-1 PN10/16, acccording to UNI ISO 228/1 |
PRESSED TYPE |
EN 1092-1/02 - DIN 2642 aluminium pressed flanges |
Face Types for Aluminium Flanges
| Type | Face Type of Aluminium 6061 Flanges |
| A | Flat Face Aluminium Alloy 6063 Flanges |
| B | Raised Face Aluminium Alloy 6082 Flanges |
| C | Tongue Face Aluminium 5083 Flanges |
| D | Grooved Face Aluminium A96061 Flanges |
| E | Spigot Aluminium DIN 3.3211 Flanges |
| F | Recess UNS A96063 Aluminium Flanges |
| G | Ring Recess WNR. 1.1213 Aluminium Flanges |
| H | O-Ring Groove WERKSTOFF NR 3.2315 Flanges |
Aluminium Flanges Dimensions
Chemical Composition of Aluminum Pipe Flanges
According to DIN 1725
| Cu | Zn | Si | Fe | Ti | Ni | Mn | Mg | Pb | Sn | Al |
|---|---|---|---|---|---|---|---|---|---|---|
| 1,0% | 0,5% | 11-13,5 | 0,8% | 0,15% | 0,2% | 0,5% | 0,3% | 0,2% | 0,1% | Rest |
Aluminium Pipe Flange Mechanical Properties
At room temperature
| Property | Unit | Value |
|---|---|---|
| 0,2 limit Rpo,2 | N/mm² | 90-120 |
| Tensile strength (p/B) | N/mm² | 160-240 |
| Fracture elongation A5 | % | 1 - 4 |
| Brinell hardness | HB 5/250 | 55-75 |
| Fatigue strength | N/mm² | 70-80 |
At high temperatures
| Property | 20° C | 50° C | 100° C | 200° C |
|---|---|---|---|---|
| 0,2 limit Rpo,2 | 90 N/mm² | 80 N/mm² | 70 N/mm² | 55 N/mm² |
| Tensile strength Rm | 190 N/mm² | 180 N/mm² | 160 N/mm² | 110 N/mm² |
| Fracture elongation A5 | 4% | 5% | 7% | 10% |
| Brinell hardness HB | 55 | 51 | 45 | 32 |
Aluminium Pipe Flanges Equivalent Specification
| Aluminium Alloy | UNS | DIN |
| 6061 | A96061 | 3.3211 |
| 6063 | A96063 | 3.32206 |
| 6082 | A96082 | 3.2315 |
| 5083 | A95083 | 3.3547 |
| 1050 | A91050 | 1.1213 |
| 1060 | A91060 | 1.0601 |
Price of Aluminium Flanges in India
| OEM Custom Cast aluminum pipe flanges | FOB Price US $0.20-$12.50/ Piece |
| Aluminium Casting Slip on flanges | FOB Price US $3.00/ Piece |
| 3 holes Aluminum alloy floor flange used for home improvement 1/2 3/4 | FOB Price US $0.21-$0.25/ Piece |
| Cast Aluminum Flange For Industrial Machines | FOB Price US $12.00-$15.00/ Piece |
| 10 inch 150 lb Aluminum slip on flange | FOB Price US $1.20-$1.86/ Piece |
| GOST aluminum flange plate,forged steel galvanized iron pipe floor flange | FOB Price US $2.10-$5.00/ Piece |
| 25mm 1 inch floor flange aluminium anchor blank blind flange base | FOB Price US $1.00-$10.00/ Set |
| 6061 T6 aluminum plate flanges | FOB Price US $0.50-$12.00/ Piece |
Please note this is an approx Price of Aluminium Flanges in India. Call on +91 22 66109735 or drop an Email to sales@skylandmetal.in for free quote and sample.