Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

API 5L Fittings

Manufacturer of API 5L Flange material in Mumbai, India, API 5L Grade B Pipe Fittings Suppliers.

Check API 5L X52 Fittings & API 5L X65 Fittings Price List India, API 5L Grade B Fittings manufacturer in India.

The American Petroleum Institute or API has created a specification for API 5L Fittings. This specification covers both seamless as well as welded steel line pipe fittings. The API 5L is steel pipe and fitting that is meant for pipeline transportation systems in industries petroleum and natural gas, since the API 5L material is well suited for conveyance of different media such as gas, water, and oil. Size range of the API 5L Grade B Pipe Fittings is limited only by manufacturer’s capabilities.


API 5L Pipe Fittings manufacturer in India

API 5L Pipe Fittings

API 5L X60 Fittings Suppliers In Mumbai

API 5L X60 Fittings

API 5L Grade B Pipe Fittings Distributor In Malaysia

API 5L Grade B Pipe Fittings

Specifications for API 5L Fittings Material strictly adhere to the International Organization for Standardization  or the ISO 3183. The specification standard for ISO 3183 has standardized pipeline transportation systems across a wide range of materials, equipment and offshore structures covering industries like the petroleum, petrochemical, and natural gas industries.  The technical committee that oversees or authors these standards have recognized that there are two basic Product Specifications Levels also known as PSL for technical requirements. Hence, the  technical committee has developed two Product Specifications Levels which are referred to as -  PSL 1 and PSL 2.  While the PSL 1 is a standard quality for line pipe, the PSL 2 contains additional mechanical properties, chemicals as well as testing requirements.


API 5L X42 Fittings Exporter in India, API 5L PSL1 Fittings manufacturers, API 5L PSL2 Fitting supplier, Latest API 5L Carbon Steel Pipe Fittings Price List in Mumbai.

Grades covered by specification API 5L are A25 ,A ,B (as well as the following “X” Grades such as X42, X46, X52, X56, X60, X65, X70, X80).  The two digit number that follows the “X” indicates that the Minimum Yield Strength in 000’s psi of the product manufactured to this grade.

Materials used to manufacture the API 5L X60 Fittings are Low Carbon and Sulfur. These two elements  in the API 5L X52 Fittings are meant for use in sour service applications and are in compliance to NACE MR 0175. Since the API 5L X42 Fittings are resistant to sulphur related stress corrosion cracking, they are used in sour working Conditions.
API 5L Pipe Fittings can be produced by using Manufacturing processes such as Seamless and welded (ERW, LSAW vs SSAW).


What is API 5L Pipe Fittings?


API 5L Fittings

Sizes that are covered under the API 5L Fittings include the Nominal Pipe Size which ranges from 2 inches to 24 inches O.D, while the Wall Thickness of the API 5L Grade B Fittings ranges from Schedule 10 through 160, STD, XS, XXS. For example,  the API 5L X65 Fittings or L415 pipe fittings are referred to as X65 is because it’s minimum yield strength required about 65000 Ksi or 450 Mpa and these fittings are known to be premium class material. Although the  a premium grade material, it is still carbon steel fitting and not an alloy one. Therefore, its specifications API 5L X65 Fittings and performances will only comply to carbon steel scope.


API 5L X52 Fittings Price List

Description Size Aprox. Wt/Unit FOB
INR
CIF
INR
FOB
USD
CIF
USD
FOB
STGP
CIF
STGP
FOB
EURO$
CIF
EURO$
Price of 5L X52 Fittings B16.9 BW R=1.5D, SCH-40
15mm
0.05
25.30
27.50
0.383
0.417
0.258
0.281
0.460
0.500
Price of 5L X52 Fittings B16.9 BW R=1.5D, SCH-40
20mm
0.05
27.60
30.00
0.418
0.455
0.282
0.306
0.502
0.545
Price of 5L X52 Fittings B16.9 BW R=1.5D, SCH-40
25mm
0.16
36.80
40.00
0.558
0.606
0.376
0.408
0.669
0.727
Price of 5L X52 Fittings B16.9 BW R=1.5D, SCH-40
32mm
0.27
52.90
57.50
0.802
0.871
0.540
0.587
0.962
1.045
Price of 5L Grade B Pipe Fittings B16.9 BW SCH-40
15mm
0.22
62.10
67.50
0.941
1.023
0.634
0.689
1.129
1.227
Price of 5L X65 Fittings B16.9 BW SCH-40
20mm
0.22
67.85
73.75
1.028
1.117
0.692
0.753
1.234
1.341
Price of 5L X42 Fittings B16.9 BW SCH-40
25mm
0.36
89.70
97.50
1.359
1.477
0.915
0.995
1.631
1.773
Price of 5L X60 Fittings B16.9 BW SCH-40
32mm
0.66
132.25
143.75
2.004
2.178
1.349
1.467
2.405
2.614

Please note this is an approx Price of API 5L X42 Fittings in India. For final API 5L X60 Fittings Price List Please Call on +91 22 66109735 or drop an Email to sales@skylandmetal.in


API 5L X65 Fittings Specification


API 5L Pipe Fittings Grade API 5L X52, API 5L X65, API 5L X42, API 5L X60
API 5L X52 Fittings Type Seamless / Welded / Fabricated Carbon Steel Pipe Fittings
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
API 5L X65 Fittings Size Range ½" NB to 48" NB in Sch 10s, 40s, 80s, 160s, XXS. (special order larger O.D. fittings)
API 5L X42 Fittings Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43.
API 5L X60 Fittings Types Elbows, Tees, Reducers, Caps, Stub Ends, Crosses, Laterals, Olets, Return Bends
Specialty Items 3D & 5D Bends, Galvanizing, 100% X-ray Testing
Applicable Standards for API 5L Grade B Fittings 1-ASME B 16.9 for large Bore Carbon Steel Pipe Fittings
2-ASME B 16.11 for small Bore Carbon Steel Pipe Fittings (socket welded)
3-ASME B 16.25 for Carbon Steel butt weld ends
4-ASME B 16.28 for small radius Carbon Steel elbow
Seamless/ Welded Carbon Steel Seamless Pipe Fittings 100% Radiography Tested

Skyland Metal & Alloys Inc. is a Govt. approved certified Stockist of API 5L Fittings in India, We have our API 5L X52 Fittings distributor and API 5L X65 Fittings wholesaler in Malaysia, Indonesia, Singapore, United Arab Emirates (UAE) & South Africa. We are well-known as a trusted Manufacturer of API 5L X42 Fittings & API 5L X60 Fittings in Mumbai, India.


API 5L Pipe Fittings Types


API 5L Equal Tee

API 5L Equal Tee

API 5L PSL1 Cross fitting

API 5L PSL1 Cross fitting

API 5L PSL2 Stub Ends

API 5L PSL2 Stub Ends

API 5L Carbon Steel Reducing Tee

API 5L Carbon Steel Reducing Tee

API 5L Steel Cross Tee

API 5L Steel Cross Tee

3LPE Coated API 5L Lap Joint Stub Ends

3LPE Coated API 5L Lap Joint Stub Ends

HIC Tested API Return Bends

HIC Tested API Return Bends

PSL 2 API 5L Pipe Elbows

PSL 2 API 5L Pipe Elbows

PSL 1 API 5L Weld Elbows

PSL 1 API 5L Weld Elbows

Carbon Steel API 5L 90 Degree Elbows

Carbon Steel API 5L 90 Degree Elbows

API 5L CS Laterals

API 5L CS Laterals

CS API 5L Concentric Reducer

CS API 5L Concentric Reducer

CS API 5L gr b Pipe Reducer

CS API 5L gr b Pipe Reducer

API 5L Grade Eccentric Reducer

API 5L Grade Eccentric Reducer

API Grade Steel End Cap

API Grade Steel End Cap


API 5L Grade B Pipe Fittings Pressure Rating


ressure-Temperature Ratings On API 5L Flange Material

Based on Code for Pressure Piping B31.1

API 5L Grade B Pipe Fittings Pressure Rating

* Nominal wall thickness; they correspond respectively to the thickness of STANDARD WALL GRADE B steel pipe.
** Ratings apply in accordance with Sections 1 and 5 of the Code for Pressure Pipe. The values shown are based upon a corrosion allowance of 0.05 inches for sizes 1" and smaller. For sizes 1 1/4" and larger, a corrosion allowance of 0.065 inches is used.
*** Upon prolonged exposure to temperatures about 775° the carbide phase of carbon steel may be converted to graphite. For other applications refer to appropriate section of B31 Code for Pressure Piping.


API 5L Grade B Pipe Fittings Based on Code for Pressure Piping B31.1

* Nominal wall thickness; they correspond respectively to the thickness of EXTRA STRONG WALL GRADE B steel pipe.
** Ratings apply in accordance with Sections 1 and 5 of the Code for Pressure Pipe. The values shown are based upon a corrosion allowance of 0.05 inches for sizes 1" and smaller. For sizes 1 1/4" and larger, a corrosion allowance of 0.065 inches is used.
*** Upon prolonged exposure to temperatures about 775o the carbide phase of carbon steel may be converted to graphite. For other applications refer to appropriate section of B31 Code for Pressure Piping.


API 5L X52 Fittings Weight Chart


API 5L X65 Fittings Dimension & Weight Measurement (KG/UNIT)

API 5L X52 Fittings Weight Chart In KG

We are API 5L Fittings Manufacturer and Exporter of API 5L X52 Fittings, API 5L X65 Fittings in Mumbai, India. All of our API 5L X42 Fittings is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc. We have our Manufacturing Unit and Dealers in Gujarat, Ahmedabad, Pune, Chennai, Indore, Kolkata, Delhi, Nagpur, Bhosari, Jaipur, API 5L Grade B Fittings for Ghaziabad, Haryana, Vadodara, West Bengal, Rajasthan, Raipur, Aurangabad, Kolhapur, API 5L Grade B Pipe Fittings for Chhattisgarh, Tamil Nadu, Karnataka, Bangalore, Punjab, API 5L X60 Fittings for Ludhiana, Gurgaon, Rajkot, Karnataka, Uttar Pradesh, Faridabad, Khopoli, API 5L Flange material for Madhya Pradesh.


API 5L X Carbon steel Fittings Chemical & Mechanical Properties


Grade Chemical Composition Yield Strength
Tensile Strength
Yield to Tensile
Elongation
  C Si Mn P S V Nb Ti min. (KSI) min. (KSI) Ratio (max) %
5L X52 0.16 0.45 1.65 0.020 0.010 0.07 0.05 0.04 52 66 0.93 21
5L X56 0.16 0.45 1.65 0.020 0.010 0.07 0.05 0.04 56 71 0.93 19
5L X60 0.16 0.45 1.65 0.020 0.010 0.08 0.05 0.04 60 75 0.93 19
5L X65 0.16 0.45 1.65 0.020 0.010 0.09 0.05 0.06 65 77 0.93 18
5L X70 0.17 0.45 1.75 0.020 0.010 0.10 0.05 0.06 70 82 0.93 17

Skyland Metal Is one of the leader manufacturers, Supplier and exporters of high quality API 5L Fittings In India


API 5L Socket Weld Fittings API 5L Socket Weld Pipe Fittings
API 5L Screwed Fittings API 5L Swage Fittings
API 5L Seamless Pipe Fittings API 5L Schedule 80 Pipe Fittings
API 5L Schedule 10 Fittings API 5L Swagelok Fittings
API 5L Sch 40 Fittings Schedule 10 API 5L Pipe Fittings
API 5L tdreaded Pipe Fittings API 5L tdreaded Fittings
API 5L Tubing Fittings API 5L Buttweld Pipe Fittings
API 5L Forged Pipe Fittings API 5L Grooved Fittings
API 5L Fittings Material API 5L pipe fittings

Check Our Client Reference In WorldWide


Kakinada Petrochemical Cluster Project, Andhra Pradesh

Kakinada Petrochemical Cluster Project, Andhra Pradesh
Godavari, Andhra Pradesh

Refinery and Petrochemical Integrated Development (RAPID)

Refinery and Petrochemical Integrated Development (RAPID), Malaysia
Pengerang, Malaysia

ExxonMobil’s Singapore Refinery, Singapore <br />

ExxonMobil’s Singapore Refinery, Singapore
Jurong, Singapore

Ras Tanura Refinery, Saudi Arabia

Ras Tanura Refinery, Saudi Arabia
Jubail, Saudi Arabia

Offshore Gas Field Expansion, Qatar

Offshore Gas Field   Expansion, Qatar
Qatar Peninsula, Qatar

JG Summit Petrochemical Complex Expansion, Philippines

JG Summit Petrochemical Complex Expansion, Philippines
Batangas City, Philippines

Rayong Refinery Construction, Thailand

Rayong Refinery Construction, Thailand
Rayong, Thailand

Korea Western Power Taean, South Korea

Korea Western Power Taean
831 Bangal-ri, Wonbuk-myeon, Taean-gun, Chungcheongnam-do, South Korea

Caorso Nuclear Power Plant, Italy

Caorso Nuclear Power Plant
Località Zerbio, Via Enrico Fermi, 5/a, 29012 Caorso PC, Italy

TECHNIP SPA SAUDI ARAMCO, SAUDI ARABIA

TECHNIP SPA SAUDI ARAMCO
JERP PACKAGE 2 – CONVERSION UNITS (SAUDI ARABIA)

Nubaria Power Station In Egypt

Nubaria Power Station In Egypt
Kheneizah, Kom Hamada, El Beheira Governorate, Egypt

Jurong Power Station In Singapore

Jurong Power Station In Singapore
16 Jurong Pier Rd, Singapore


Looking for cheap & best quality API 5L X60 Fittings manufacturer in India? Buy directly from API 5L Steel Buttweld Fittings manufacturers in Mumbai. 3LPE Coated API 5L Pipe Fitting, PSL 2 API 5L BW Fittings stockholder & CS API 5L gr b Elbow/ API 5L Fittings Wholesaler.
Exporter of HIC Tested API Buttweld Pipe Fittings, PSL 1 API 5L Butt Weld Fittings stockist in UAE, Carbon Steel API 5L Weld Fittings Traders, API 5L CS Welded Fittings dealer. Best deals to buy bulk CS API 5L Welded Pipe Fittings for piping connection, API Carbon Steel Pipe Fittings & API 5L Fittings manufacturers in India.

Skyland Metal & Alloys Inc. is a API 5L Fittings manufacturer and supplier of API 5L X60 Fittings offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, Thailand, Vietnam, Indonesia, Saudi Arabia (KSA), Singapore, Kuwait, Qatar, Philippines, United Arab Emirates (UAE), South Africa, UK, Oman, Bahrain. You can mail to sales@skylandmetal.in for API 5L Grade B Fittings to induce live quotes now. Looking to buy API 5L Grade B Pipe Fittings & API 5L Flange material at the best cost in India.