Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ANSI / ASME B16.11 Reducing Threaded Tee

Manufacturer of ANSI B16.11 Stainless Steel Screwed Reducing Tee in Mumbai, India, Carbon Steel Forged Reducing Tee Suppliers.

NPT, ISO/BSP, SAE threads Threaded Reducing Tee Dimensions & ASME B16.11 Copper Threaded Pipe Reducing Tee Price List, Brass 3000 Threaded Reducing Tee manufacturer in India.


The sole purpose of a 3000 threaded reducing tee is to make a 90° branch from the main run of pipe. According to the Standard A182 SS Threaded Unequal Tees specification there are 2 possibilities, on behalf of the equal tee and reducing tee. The equal tee otherwise referred to as a straight tee can be used as the branch and it has the same diameter as the run-pipe. The 3000# threaded reducing tee is used as the branch and it has a smaller diameter as the run-pipe.

A stainless steel Reducing Threaded Tee is a T-shaped pipe fitting with two outlets that cut at a 90 degrees angle to the main line. These carbon steel threaded reducing tee are available with a combination of diverse outlet sizes in the market. In the npt reducing tee, the branch port size is smaller as compared to the other ports of the run.


ASME B16.11 Threaded Reducing Tee Manufacturers In India

ASME B16.11 Threaded Reducing Tee

Stainless Steel Reducing Tee Npt Supplier In Mumbai

Stainless Steel Reducing Tee Npt

Reducing Threaded Tee Distributor In Jordan

Reducing Threaded Tee

ASME B16.11 Duplex Steel Npt Reducing Tee manufacturers, BS 3799 Stainless Steel Reducing Tee Npt Exporter in India, Carbon Steel Threaded Reducing Tee stockholder, NPT 3000 lbs Stainless Steel Threaded Reducing Tee Price List in Mumbai.

Features of the stainless steel threaded reducing tee are as follows -

  • The threaded reducing tee dimensions should be produced under strict security standards.
  • Forged Threaded Reducing Tee must provide good impact strength.
  • carbon steel threaded reducing tee has to be easy to install.
  • Alloy Steel Forged Screwed Unequal Tee  must be light in weight

ASME B16.11 threaded reducing tee are available in solvent weld sockets, female thread sockets, side outlets and opposed solvent weld sockets. These types of threaded reducing tee dimensions fittings for pipes are essential as they serve two purposes, i.e.,-  the threaded pipe reducing tee can be used to either combine or split a fluid flow. These  threaded reducing tee sizes are widely used for positive as well as vacuum applications. Moreover, threaded reducing tee weight also could be used to minimize delivery lines to feed ice makers. Due to the smooth flow paths of the ASME B16.11 threaded reducing tee, there is no turbulence witnessed. Hence they can be used for water and waste supply management. The carbon steel threaded reducing tee is primarily used in the fields of semiconductor, life sciences, and chemical processing.

Applications of the Forged Threaded Reducing Tee include their use in the following industries such as Oil and gas transmissions, Chemical Industries, Machines and equipment, Heat Exchanger, Power stations, Sanitary tubing, Water treatment systems as well as Petroleum and Oil refining. The ASTM A182 SS Threaded Unequal Tees specification covers standards for forged low alloy and stainless steel piping components that have been designed and manufactured for use in pressure systems.


What is ASME B16.11 Threaded Reducing Tee?


ASME B16.11 Reducing Threaded Tee

Alloy Steel Forged Screwed Unequal Tee  has been specifically  designed, for use in very low as well very high temperature zones. These stainless steel reducing tee npt tend to have strong tensile strength along with excellent resistance against abrasion and wear tear. At Skyland Metal, We manufacture and supply these pipe fittings of the Threaded Unequal Tee Dimensions to be used for connecting 3 pipes with different diameters in a piping system at an angle of 90°.


Threaded Pipe Reducing Tee Price List


S.NO. Description Unit Quantity PRICE IN US ($)
1. RED.STRAIGHT TEE: 3/4 x 1/2 NPS, ASTM A105N, NPT (F) THRD (ASME B1.20.1), CL.6000#, NACE MR-0175/ISO 15156, ASME B16.11 A06E 4 NOS $49.00
2. RED.STRAIGHT TEE: 3/4 x 1/2 NPS, ASTM A234-WPB, NPT (F) THRD (ASME B1.20.1), SCH 160 X160, BE, NACE MR-0175/ISO 15156, ASME B16.9 OUT OF SPEC  4 NOS  $90.00
3. RED.STRAIGHT TEE: 1 X 1/2 NPS, ASTM A105, NPT (F) THRD (ASME B1.20.1), CL.3000#, GALV.TO A153, ASME B16.11 G01A 7 NOS  $81.00
4. RED.STRAIGHT TEE: 2 X 1 NPS, ASTM A 105,NPT (F) THRD (ASME B1.20.1),CL.3000#, GALV.TO A153, ASME B16.11 G01A 6 NOS  $12.00

Please note this is an approx Price of ASME B16.11 threaded reducing tee in India. For final Reducing Threaded Tee Price List Please Call on +91 22 66109735 or drop an Email to sales@skylandmetal.in.


Skyland Metal & Alloys Inc. is an ISO certified ASME B16.11 threaded reducing tee manufacturers & Reducing Threaded Tee distributor in India.


Npt Reducing Tee Specification


Reducing Threaded Tee Dimensions ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
threaded pipe reducing tee Size 1/8″ NB TO 4″ NB
npt reducing tee Class 33000 LBS, 6000 LBS, 4500 LBS
Forged Threaded Reducing Tee Type Socket Weld (S/W) & SCREWED (SCRD) – NPT, BSP, BSPT   
threaded pipe reducing tee Form Threaded Reducing Tee, Forged Threaded Reducing Tee
threaded pipe reducing tee Pressure Ratings Up to 20,000 psig (1,378 bar)
3000 threaded reducing tee Temperature Ratings Up to 1000° F (537° C)
stainless steel threaded reducing tee Material 316 stainless steel, brass, carbon steel
Types of carbon steel threaded reducing tee NPT, ISO/BSP, SAE threads
Sizes available 1/16 to 1 in.
Reducing Threaded Tee Main Types Pipe nipples, adapter and gaskets, reducing bushing and reducers, couplings, elbows, tees, crosses, union ball joints, caps, and plugs
carbon steel threaded reducing tee Value Added Services: Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
stainless steel threaded reducing tee Production Grades: Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel

Stainless Steel Reducing Tee Npt Standards


ASME B16.11 Threaded Reducing Tee Fitting: ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799
DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
EN: EN10253-1, EN10253-2

Forged Threaded Reducing Tee Material


carbon steel threaded reducing tee
  • ASTM A105 Reducing Threaded Tee
  • ASME SA105
  • DIN 1.0402
  • DIN 1.0460
  • DIN 1.0619
  • ASTM A105N
  • ASME SA105N
  • ASTM A350 LF2
  • ASME SA350
  • High Yield CS ASTM A694
stainless steel threaded reducing tee
  • ASTM A182 F304 Reducing Threaded Tee
  • ASTM A182 F304L
  • ASTM A182 F316L
  • ASTM A182 F317
  • ASTM A182 F317L
  • ASTM A182 F321
  • ASTM A182 F321H
  • ASTM A182 F347
  • ASTM A182 F347H
Alloy Steel Forged npt reducing tee
  • ASTM A182 F5 Reducing Threaded Tee
  • ASTM A182 F9
  • ASTM A182 F11
  • ASTM A182 F22
  • ASTM A182 F91
Titanium Forged Threaded Reducing Tee
  • ASTM B381 Titanium Gr. 1 Reducing Threaded Tee
  • ASTM B381 Titanium Gr. 2
  • ASTM B381 Titanium Gr. 4
  • ASTM B381 Titanium Gr. 5
  • ASTM B381 Titanium Gr. 7
Inconel Forged threaded pipe reducing tee
  • Inconel 600 Reducing Threaded Tee
  • Inconel 601
  • Inconel 625
  • Inconel 718
  • Inconel x750
Copper threaded pipe reducing tee T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Forged Threaded Reducing Tee Copper Nickel 90/10 (C70600 ) Reducing Threaded Tee, Cupro Nickel 70/30 (C71500) reducing tees, UNS C71640 reducing tees
Brass Forged Threaded Reducing Tee 3602 / 2604 / H59 / H62 / etc.
Hastelloy Forged Threaded Reducing Tee Hastelloy C276 (UNS N10276) reducing tees, C22 (UNS N06022) reducing tees, C4 reducing tees, C2000 reducing tees, B2 reducing tees, B3 reducing tees, X reducing tees
Monel Forged Threaded Reducing Tee Monel 400 (UNS No. N04400) reducing tees, Monel 500 (UNS No. N05500) reducing tees
Alloy 20 Forged Threaded Reducing Tee Carpenter® 20 Alloy Reducing Threaded Tee, Alloy 20Cb-3 reducing tees
Aluminium npt reducing tee 5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel npt reducing tee Nickel 200 reducing tees, Nickel 201 reducing tees
Duplex threaded reducing tee S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex threaded reducing tee S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy threaded reducing tee Incoloy 800 reducing tees, Incoloy 800H Reducing Threaded Tee, Incoloy 800HT (UNS N08800) reducing tees, Incoloy 825 (UNS N08825) reducing tees
254 Smo Forged threaded reducing tee SMO 254/6Mo reducing tees, UNS S31254 Reducing Threaded Tee, DIN 1.4547 reducing tees
Nimonic Forged threaded reducing tee Nimonic 75 reducing tees, Nimonic 80A reducing tees, Nimonic 90 reducing tees
Other ASME B16.11 threaded reducing tee material Tin bronze reducing tees, Alumunum bronze Reducing Threaded Tee, Lead bronze reducing tees

Skyland Metal is an ISO certified Alloy Steel Forged Screwed Unequal Tee manufacturer & ASTM A182 SS Threaded Unequal Tees distributor in India


ASME B16.11 Threaded Reducing Tee Types


Class 3000 elbow, Threaded Reducing Tee

Class 3000 elbow, Threaded Reducing Tee

Class 6000 elbow, Threaded Reducing Tee

Class 6000 elbow, Threaded Reducing Tee

Class 9000 elbow, Threaded Reducing Tee

Class 9000 elbow, Threaded Reducing Tee

B16.11 Threaded Reducing Tee

B16.11 Threaded Reducing Tee


ASTM A105 Threaded Reducing Tee

ASTM A105 Threaded Reducing Tee

A182 Threaded Reducing Tee

A182 Threaded Reducing Tee

ASTM A350 Threaded Reducing Tee

ASTM A350 Threaded Reducing Tee

A182 Gr F304 Forged Threaded Reducing Tee

A182 Gr F304 Forged Threaded Reducing Tee

A182 Gr F304 Forged Threaded Unequal Tees

A182 Gr F304 Forged Threaded Unequal Tees

A182 Gr F321 Threaded Unequal Tees

A182 Gr F321 Threaded Unequal Tees

A182 Gr F347 Threaded Unequal Tees

A182 Gr F347 Threaded Unequal Tees

A350 Gr LF2 Threaded Unequal Tees

A350 Gr LF2 Threaded Unequal Tees


Threaded Reducing Tee Dimensions


Check ASME B16.11 threaded reducing tee dimensions

Threaded Reducing Tee Dimensions

Threaded Reducing Tee Dimensions

Threaded Reducing Tee Class 2000 Dimensions NPS 1/2 to 4


Threaded Reducing Tee Dimensions, 3/4 Threaded Reducing Tee Dimensions NPS 1/2 to 4 Class 2000

NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 33 28 3.18
3/4 12.7 13.9 38 33 3.18
1 14.7 17.3 46 38 3.68
1.1/4 17 18 56 44 3.89
1.1/2 17.8 18.4 62 51 4.01
2 19 19.2 75 60 4.27
2.1/2 23.6 28.9 92 76 5.61
3 25.9 30.5 109 86 5.99
4 27.7 33 146 106 6.55

Threaded Equal Reducing Tee Class 3000 Dimensions NPS 1/2 to 4


NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 38 33 4.09
3/4 12.7 13.9 46 38 4.32
1 14.7 17.3 56 44 4.98
1.1/4 17 18 62 51 5.28
1.1/2 17.8 18.4 75 60 5.56
2 19 19.2 84 64 7.14
2.1/2 23.6 28.9 102 83 7.65
3 25.9 30.5 121 95 8.84
4 27.7 33 152 114 11.18

Skyland Metal & Alloys Inc. is a Reducing Threaded Tee manufacturer and supplier of ASME B16.11 threaded reducing tee offering in all Ratings up to 3000#, built a distribution network with more then 15 countries globally like Malaysia, India, Thailand, Vietnam, Indonesia, Saudi Arabia (KSA), Singapore, Kuwait, Qatar, Philippines, United Arab Emirates (UAE), South Africa, UK, Oman, Bahrain. You can mail to sales@skylandmetal.in for Screwed Reducing Tee to induce live quotes now. Looking to buy Forged Reducing Tee at the best cost in India.


Threaded Reducing Tee Class 6000 Dimensions NPS 1/2 to 4


NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 46 38 8.15
3/4 12.7 13.9 56 44 8.53
1 14.7 17.3 62 51 9.93
1.1/4 17 18 75 60 10.59
1.1/2 17.8 18.4 84 64 11.07
2 19 19.2 102 83 12.09
2.1/2 23.6 28.9 121 95 15.29
3 25.9 30.5 146 106 16.64
4 27.7 33 152 114 18.67

General notes:

  • Dimensions are in millimeters unless otherwise indicated.
  • Dimension B is minimum length of perfect thread.
    The length of useful thread (B plus threads with fully formed roots and flat crests) shall not be less than J.

Different npt reducing tee sealing types are selected industry wise such as many pressure systems onboard ships use BSPP stainless steel reducing tee npt while many applications in the oil and gas industry use NPT Alloy Steel Forged Screwed Unequal Tee. NPT Thread Forged Threaded Reducing Tee is an American Standard Taper Pipe Thread as per ANSI/ASME B1.20.1.


We produce ASTM A182 SS Threaded Unequal Tees in below two most common standards for tapered threads


  • NPT American National Standard Taper Pipe Thread ASME B16.11 threaded reducing tee
  • BSPT British Standard Pipe Taper Thread stainless steel threaded reducing tee

Why use NPT stainless steel reducing tee?


  • 3000# threaded reducing tee NPT threads have an angle of 60°
  • NPT threads also have flattened peaks and valleys

Why use BSPT 3000 threaded reducing tee?


  • BSPT threads have an angle of 55°
  • Compare to NPT Forged Threaded Reducing Tee BSPT threads have rounded peaks and valleys

ASME B16.11 threaded reducing tee Threads:


  • NPT : National Pipe Thread Taper
  • FPT, FNPT, NPT(F)* Female or internal tapered pipe threads
  • MPT, MNPT, NPT(M) Male or external tapered pipe threads
  • BSPT: British Standard Pipe Taper
  • BS 21: British Standard Pipe Taper
  • DIN 2999: Pipe Threads for Tubes and Fittings
  • PT: Japanese Industrial Standard (JIS) Tapered Pipe Thread
  • ISO 7-1: Pipe Threads where Pressure-Tight Joints are made on the Threads
  • DIN 158: Metric External Taper Screw Threads and Mating Internal Parallel Screw Threads

Threaded Unequal Tee Dimensions


Threaded Unequal Tee Dimensions

Threaded Unequal Tee Weight Chart


Class 2000 Nominal Pipe Size 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 2 1/16 2 1/2 3 1/8
Wt 0.188 0.236 0.435 0.740 1.058 1.375 1.740 2.883 7.750 11.313 19.125

Class 3000
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
F 3/4 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Wt 0.250 0.290 0.500 0.750 1.188 1.988 2.235 3.000 4.930 7.375 13.588 19.063

Class 6000
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
B 1 1/6 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4
F 3/4 1 1 1/8 1 1/4 1 5/16 1 3/8 1 11/16 1 3/4 2 1/16 2 1/2 3 1/8
Wt 0.250 0.640 0.500 1.438 2.188 2.785 4.688 5.750 9.500 15.000 30.563

We are Reducing Threaded Tee Manufacturer and Exporter of ASME B16.11 threaded reducing tee, Threaded Pipe Reducing Tee in Mumbai, India. All of our Npt Reducing Tee is made and tried to worldwide guidelines, and specifications as per ASME, ANSI & ASTM, etc. We have our Manufacturing Unit and Dealers in Gujarat, Ahmedabad, Pune, Chennai, ANSI B16.11 Forged Threaded Unequal Tee for Indore, Kolkata, Delhi, Nagpur, Stainless Steel Reducing Tee Npt for Bhosari, Bangalore, Punjab, Ludhiana, Gurgaon, Rajkot, Karnataka, Alloy Steel Forged Screwed Unequal Tee for Uttar Pradesh, Faridabad, Khopoli, Madhya Pradesh, Jaipur, Ghaziabad, Haryana, Forged Threaded Reducing Tee for Vadodara, West Bengal, ASTM A182 SS Threaded Unequal Tees for Rajasthan, SS 310 Threaded Reducing Tee for Raipur, Aurangabad, Kolhapur, Chhattisgarh, Tamil Nadu, Karnataka.


ISO Approved Manufacturer of Reducing Threaded Tee in India


Alloy Steel Forged Screwed Unequal Tee threaded pipe reducing tee
3000 threaded reducing tees 3000# threaded reducing tees
stainless steel threaded reducing tees carbon steel threaded reducing tees
npt reducing tee stainless steel reducing tee npt
Forged Threaded Reducing Tees ASTM A182 SS Threaded Unequal Tees
ASME B16.11 threaded reducing tee ASTM A182 SS Threaded Unequal Tees
Stainless Steel Reducing Tee Npt Threaded Unequal Tee
Alloy Steel Forged Screwed Unequal Tees Forged Threaded Reducing Tee
ASTM A182 SS Threaded Unequal Tees SS 310 Threaded Reducing Tees
ANSI B16.11 Forged Threaded Unequal Tees BS3799 Screwed Forged Unequal Tees
Hastelloy C22 Forged Pipe Tees Copper Nickel Threaded Tees

Skyland Metal & Alloys Inc. is a Govt. approved certified ASME B16.11 threaded reducing tee in India. All of our Reducing Threaded Tee & Screwed Reducing Tee are manufactured and tested to international standards, and specifications as per JIS, EN, DIN, ASTM etc. We are well-known as a trusted vendor as a BS3799 Screwed Forged Unequal Tee manufactuers & Hastelloy C22 Forged Pipe Tee distributor in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.


Our New Flanges And Fittings Project In Worldwide


ExxonMobil’s Singapore Refinery, Singapore <br />

ExxonMobil’s Singapore Refinery, Singapore
Jurong, Singapore

Ras Tanura Refinery, Saudi Arabia

Ras Tanura Refinery, Saudi Arabia
Jubail, Saudi Arabia

Kakinada Petrochemical Cluster Project, Andhra Pradesh

Kakinada Petrochemical Cluster Project, Andhra Pradesh
Godavari, Andhra Pradesh

Refinery and Petrochemical Integrated Development (RAPID)

Refinery and Petrochemical Integrated Development (RAPID), Malaysia
Pengerang, Malaysia

Abu Dhabi Gas Distribution Network Pipeline Project

Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)

Bul Hanine Redevelopment

Bul Hanine Redevelopment,
Qatari Coastline, Qatar

Khulud Tight Gas Project

Khulud Tight Gas Project,
Yibal, Oman

Zuluf Field Expansion Project

Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)

Rayong Refinery Construction, Thailand

Rayong Refinery Construction, Thailand
Rayong, Thailand

Korea Western Power Taean, South Korea

Korea Western Power Taean
831 Bangal-ri, Wonbuk-myeon, Taean-gun, Chungcheongnam-do, South Korea

Offshore Gas Field Expansion, Qatar

Offshore Gas Field   Expansion, Qatar
Qatar Peninsula, Qatar

JG Summit Petrochemical Complex Expansion, Philippines

JG Summit Petrochemical Complex Expansion, Philippines
Batangas City, Philippines


Looking for Burr-free Forged Threaded Reducing Tee manufacturer in India? Buy from oldest Alloy Steel Forged Screwed Unequal Tee manufacturers in Mumbai. Smooth thread ASTM A182 SS Threaded Unequal Tees & trouble-free performance, Nickel Alloy Threaded Unequal Tee supplier.
ANSI B16.11 Forged Threaded Unequal Tee Wholesaler, exporter of Duplex SS Threaded Reducing Tee, 3000# Threaded Reducing Tee Traders, SS 310 Threaded Reducing Tee stockist in UAE, BS3799 Screwed Forged Unequal Tee dealer. Buy Hastelloy C22 Forged Pipe Tee for NPT threaded connections, Copper Nickel Threaded Tee manufacturers in India.

Skyland Metal & Alloys Inc. is a Govt. approved certified Stockist of ASME B16.11 threaded reducing tee in India, We have our Reducing Threaded Tee distributor and wholesaler in Malaysia, Indonesia, Singapore, United Arab Emirates (UAE) & South Africa. We are well-known as a trusted Manufacturer of Screwed Reducing Tee & Forged Reducing Tee in Mumbai, India.