Pipe Fittings Flanges Suppliers In UAE, Qatar, Saudi Arabia, Brazil, Turkey, Argentina, Malaysia, Panama.

ANSI / ASME B16.9 Reducing Cross

Manufacturer of ANSI B16.9 SS Unequal Cross in Mumbai, India, CS Reducing Cross Tee Suppliers.

Check BS1640 Reducing Cross Dimensions & ASME B16.9 Unequal Cross Pipe Fitting Price List, MSS SP-75 Reducing Cross Pipe Fitting manufacturer in India.


The ASME B16.9 Reducing Cross is a type of Pipe Fitting, which is also known as unequal pipe cross. This Carbon Steel Buttweld Reducing Cross is a kind of fitting which has four branch ends that are not of the same diameters.
Stainless Steel Buttweld Unequal Cross also referred to as four-way fittings or cross branch line.

The Asme B16.9 Unequal Cross produced by us can be made in two ways  i.e. 1. These Unequal Cross Fittings can have one inlet and three outlets or 2. The SS Unequal Cross could also be manufactured vice versa i.e. – three inlets and one outlet. These Reducing Cross Pipe Fitting often tend to have solvent-welded socket or female-threaded ends.


ASME B16.9 Reducing Cross Manufacturer in India

ASME B16.9 Reducing Cross

Reducing Cross Pipe Fitting Suppliers In Mumbai

Reducing Cross Pipe Fitting

Grooved Reducing Cross Distributor In UAE

Grooved Reducing Cross

ASME B16.9 Reducing Cross Fitting manufacturers, Grooved Reducing Cross Exporter in India, ANSI B16.9 Pipe Reducing Cross Fittings stockholder, 1/2 to 48 Inch Carbon Steel Buttweld Reducing Cross Price List in Mumbai.

Cross fittings may stress pipes as temperatures change, due to the Unequal Cross Pipe Fitting being at the centre of four connection points. The Reducing Cross Dimensions are as follows - Outside Diameter of a Seamless Cross Fitting could be manufactured from  ½ inch ~ 24 inches , while in the ERW, Welded & Fabricated type of reducing  Cross Fitting, our stocklist generally consists of  the fittings available in between dimensions  - 1/2 inch ~48 inches. At__,  we produce fittings such as the Reducing Cross Tee as required by the buyer, although the Wall Thickness size of the Reducing Cross Fitting  are available in the following schedules 3mm – 40mm / SCH 5, SCH 10, SCH 20, SCH 30, SCH 40, STD, SCH 80, XS, SCH 60, SCH 80, SCH 120, SCH 140, SCH 160 & XXS

We also produce various types of crosses such as Seamless, Welded, Equal Cross & Grooved Reducing Cross.

Production Grades of the Ansi B16.9 Pipe Reducing Cross Fittings can be typically done in metals such as Alloy Steel, Duplex, Stainless Steel, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel.


What is ASME B16.9 Reducing Cross?


ASME B16.9 Reducing Cross

Value Added Services offered by us at our factory includes surface treatment of the ASME B16.9 Reducing Cross by coating its surface by various chemical and mechanical processes. The mechanical processes used in the treatment of Ansi B16.9 Pipe Reducing Cross Fittings includes processes such as Sand Blasting, Threading, Soldering. While chemicals used to surface treat the Stainless Steel Buttweld Unequal Cross  include processes such as electroplating and coating by Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polishing .


Reducing Cross Pipe Fitting Price List


SR NO Description Piping Material Class / QTY PRICE (USD$)
1 RED.CROSS: 12 NPS, ASTM A 234-WPB, SMLS, BE, SCH20, NACE MR-0175/ISO 15156, ASME B16.9 A01E 4 NOS  $3
2 RED.UNEQUAL CROSS: 8 NPS, ASTM A 234-WPB, SMLS, BE, SCH20, NACE MR-0175/ISO 15156, ASME B16.9 A01E 11 NOS  $60.00
3 RED.UNEQUAL CROSS: 3 NPS, ASTM A 234-WPB, SMLS, BE, SCH40, NACE MR-0175/ISO 15156, ASME B16.9 A01E/ A03E 15 NOS  $10.00
4 RED.UNEQUAL CROSS: 10 NPS, ASTM A 234-WPB, SMLS, BE, SCH20, NACE MR-0175/ISO 15156, ASME B16.9 A01E 17 NOS  $3
5 RED.UNEQUAL CROSS: 2 NPS, ASTM A 234-WPB, SMLS, BE, SCH80, NACE MR-0175/ISO 15156, ASME B16.9 A01E 24 NOS  $30.00
6 RED.UNEQUAL CROSS: 8 NPS, ASTM A 234-WPB, SMLS, BE, SCH40, NACE MR-0175/ISO 15156, ASME B16.9 A03E 6 NOS  $60.00
7 RED.UNEQUAL CROSS: 4 NPS, ASTM A 234-WPB, SMLS, BE, SCH40, NACE MR-0175/ISO 15156, ASME B16.9 A01E/A03E 18 NOS  $50.00

Please note this is an approx Price of Unequal Cross Pipe Fitting in India. For final ASME B16.9 Reducing Cross Price List Please Call on +91 22 66109735 or drop an Email to sales@skylandmetal.in.


Reducing Cross Fitting Specification


Specifications ASME B16.9 Reducing Cross
Unequal Cross Pipe Fitting size Seamless Butt Weld Fittings: 1/2" - 10"
Welded Butt Weld Fittings: 1/2" - 48"
Reducing Cross Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
Reducing Cross Pipe Fitting Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
Reducing Cross FittingTypes Seamless / ERW / Welded / Fabricated Pipe Fittings
Grooved Reducing Cross Type DN15-DN1200
Connection for Reducing Cross Tee Welding
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
SS Unequal Cross Fittings Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process for Ansi B16.9 Pipe Reducing Cross Fittings Push, Press, Forge, Cast, etc.
Carbon Steel Buttweld Reducing Cross Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Origin & Mills for Stainless Steel Buttweld Unequal Cross Japanese, Indian, USA, Korean, European, Ukraine, Russian
Key markets and industries for Unequal Cross Fittings
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Asme B16.9 Unequal Cross Application
  • Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • ASME B16.9 Schedule 10 Reducing Cross are an economical alternative for lower-pressure applications.
  • ANSI B16.9 Schedule 40 Reducing Cross have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Grooved Reducing Cross Material


Prestige quality Reducing Crosses Pipe Fitting Suppliers in India offer these Reducing Cross Dimension in DIN, EN, BS, ISO, JIS or ANSI standard.

Carbon Steel Buttweld Reducing Cross
  • ASTM A105 Unequal Crosses Pipe Fitting
  • ASME SA105 Reducing Cross Pipe Fitting
  • DIN 1.0402 Reducing Cross Fitting
  • DIN 1.0460 Grooved Reducing Cross
  • DIN 1.0619 Reducing Crosses Pipe Fitting
  • ASTM A105N Reducing Cross Pipe Fitting
  • ASME SA105N Reducing Cross Pipe Fitting
  • ASTM A350 LF2 Reducing Cross Fitting
  • ASME SA350 Grooved Reducing Crosses
  • High Yield CS ASTM A694 Unequal Cross Pipe Fitting
Stainless Steel Buttweld Unequal Cross
  • ASTM A182 F304 Reducing Cross Fitting
  • ASTM A182 F304L Reducing Cross Tee
  • ASTM A182 F316 Grooved Reducing Cross
  • ASTM A182 F316L Reducing Cross
  • ASTM A182 F317 Reducing Cross Tee
  • ASTM A182 F317L Unequal Cross Fittings
  • ASTM A182 F321 Reducing Cross
  • ASTM A182 F321H Reducing Crosses Fitting
  • ASTM A182 F347 Reducing Cross
  • ASTM A182 F347H Reducing Crosses Pipe Fitting
Alloy Steel Reducing Cross
  • ASTM A182 F5 Reducing Cross Fitting
  • ASTM A182 F9 Grooved Reducing Cross
  • ASTM A182 F11 Unequal Crosses Fittings
  • ASTM A182 F22 Reducing Crosses Tee
  • ASTM A182 F91 Reducing Crosses Fitting
Inconel Reducing Cross Fitting
  • Inconel 600 Grooved Reducing Cross
  • Inconel 601 Reducing Crosses Fitting
  • Inconel 625 Reducing Cross Pipe Fitting
  • Inconel 718 Reducing Cross Fittings
  • Inconel x750 Reducing Crosses
Copper Grooved Reducing Cross Fitting T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel Grooved Reducing Crosses Copper Nickel 90/10 (C70600 ) Reducing Crosses, Cupro Nickel 70/30 (C71500) Unequal Crosses, UNS C71640 Grooved Reducing Crosses
Brass Reducing Cross Pipe Fitting 3602 / 2604 / H59 / H62 / etc.
Hastelloy Unequal Cross Fittings Hastelloy C276 (UNS N10276) Unequal Crosses, C22 (UNS N06022) Reducing Crosses, C4 Reducing Crosses, C2000 Reducing Crosses Fitting, B2 Grooved Reducing Crosses, B3 Reducing Crosses, X Reducing Cross Pipe Fitting
Monel Reducing Cross Tee Monel 400 (UNS No. N04400) Unequal Crosses, Monel 500 (UNS No. N05500) reducing Crosses pipe fitting
Alloy 20 Grooved Reducing Cross Carpenter® 20 Alloy Reducing Crosses Tee, Alloy 20Cb-3 unequal Crosses pipe fitting
Aluminium Reducing Cross Fitting 5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel Unequal Cross Fittings Nickel 200 Reducing Cross, Nickel 201 Reducing Crosses Pipe Fitting
Duplex Unequal Cross Fittings S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex Reducing Cross S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy Grooved Reducing Cross Incoloy 800 Reducing Crosses Pipe Fitting, Incoloy 800H Unequal Cross, Incoloy 800HT (UNS N08800) Reducing Cross Fitting, Incoloy 825 (UNS N08825) Unequal Crosses Fittings
254 Smo Reducing Cross SMO 254/6Mo Grooved Reducing Crosses, UNS S31254 Unequal Crosses, DIN 1.4547 Reducing Crosses Fitting
Nimonic Reducing Cross Tee Nimonic 75 Unequal Crosses, Nimonic 80A Unequal Cross, Nimonic 90 Unequal Cross Fittings
Other Reducing Cross Pipe Fitting material Tin bronze Reducing Fitting, Alumunum bronze Reducing Crosses Tee, Lead bronze Reducing Crosses Tee
Titanium Unequal Cross Fittings
  • ASTM B381 Titanium Gr. 1
  • ASTM B381 Titanium Gr. 2
  • ASTM B381 Titanium Gr. 4
  • ASTM B381 Titanium Gr. 5
  • ASTM B381 Titanium Gr. 7

Skyland Metal is an ISO certified Reducing Cross Pipe Fitting Suppliers & distributor in India

Skyland Metal is a manufacturer and supplier of ASME B16.9 Reducing Cross & Check Reducing Cross Dimensions, offering in all Ratings up to 2500#, built a distribution network with more then 65 countries globally.


ASME B16.9 Reducing Cross Types


ASME B16.9 Reducing Crosses SCH 10

ASME B16.9 Reducing Cross SCH 10

Unequal Crosses Pipe Fitting SCH 40

Unequal Cross Pipe Fitting SCH 40

Reducing Crosses Pipe Fitting Sch 80

Reducing Cross Pipe Fitting Sch 80

ASME B16.9 Reducing Crosses Fitting

ASME B16.9 Reducing Cross Fitting

ANSI B16.9 Grooved Reducing Crosses

ANSI B16.9 Grooved Reducing Cross

Mss Reducing Crosses Tee

Mss Reducing Cross Tee

Buttweld Unequal Crosses

Buttweld Unequal Cross

DIN2605 Unequal Crosses Fittings

DIN2605 Unequal Cross Fittings

Carbon Steel Buttweld Reducing Crosses

Carbon Steel Buttweld Reducing Cross

Stainless Steel Buttweld Unequal Crosses

Stainless Steel Buttweld Unequal Cross

A403 Gr WP304 Unequal Crosses Pipe Fitting

A403 Gr WP304 Unequal Cross Pipe Fitting

A234 Gr WPB SS Unequal Cross

A234 Gr WPB SS Unequal Cross


ASME B16.9 Reducing Cross Dimensions


ASME B16.9 Reducing Cross Dimensions
Nominal Diameter Outside Diameter Center to End
D1 D2
DN NPS Series A Series B Series A Series B C M
1*15 1/*1/2 21.3 18 21.3 18 25 25
1*10 1/*3/8 21.3 18 17.3 14 25 25
1*8 1/*1/4 21.3 18 13.7 10 25 25
2*20 3/*3/4 26.9 25 26.9 25 29 29
2*15 3/*1/2 26.9 25 21.3 18 29 29
2*10 3/*3/8 26.9 25 17.3 14 29 29
2*25 *1 33.7 32 33.7 32 38 38
2*20 *3/4 33.7 32 26.9 25 38 38
2*15 *1/2 33.7 32 21.3 18 38 38
3*32 1.1/*1.1/4 42.4 38 42.4 38 48 48
3*25 1.1/*1 42.4 38 33.7 32 48 48
3*20 1.1/*3/4 42.4 38 26.9 25 48 48
3*15 1.1/*1/2 42.4 38 21.3 18 48 48
4*40 1.1/*1.1/2 48.3 45 48.3 45 57 57
4*32 1.1/*1.1/4 48.3 45 42.4 38 57 57
4*25 1.1/*1 48.3 45 33.7 32 57 57
4*20 1.1/*3/4 48.3 45 26.9 25 57 57
4*15 1.1/*1/2 48.3 45 21.3 18 57 57
5*50 *2 60.3 57 60.3 57 64 64
5*40 *1.1/2 60.3 57 48.3 45 64 60
5*32 *1.1/4 60.3 57 42.4 38 64 57
5*25 *1 60.3 57 33.7 32 64 51
5*20 *3/4 60.3 57 26.9 25 64 44
6*65 2/1/*2.1/2 73.0 76 73.0 76 76 76
6*50 2/1/*2 73.0 76 60.3 57 76 70
6*40 2/1/*1.1/2 73.0 76 48.3 45 76 67
6*32 2/1/*1.1/4 73.0 76 42.4 38 76 64
6*25 2/1/*1 73.0 76 33.7 32 76 57
8*80 *3 88.9 89 88.9 89 86 86
8*65 *2.1/2 88.9 89 73.0 76 86 83
8*50 *2 88.9 89 60.3 57 86 76
8*40 *1.1/2 88.9 89 48.3 45 86 73
8*32 *1.1/4 88.9 89 42.4 38 86 70
9*90 3.1/*3.1/2 101.6 101.6 95 95
9*80 3.1/*3 101.6 88.9 89 95 92
9*65 3.1/*2.1/2 101.6 73.0 76 95 89
9*50 3.1/*2 101.6 60.3 57 95 83
9*40 3.1/*1.1/2 101.6 48.3 45 95 79
10*100 *4 114.3 108 114.3 108 105 105
10*90 *3.1/2 114.3 108 101.6 105 102
10*80 *3 114.3 108 88.9 89 105 98
10*65 *2.1/2 114.3 108 73.0 76 105 95
10*50 *2 114.3 108 60.3 57 105 89
10*40 *1.1/2 114.3 108 48.3 45 105 86
12*125 *5 141.3 133 141.3 133 124 124
12*100 *4 141.3 133 114.3 108 124 117
12*90 *3.1/2 141.3 101.6 124 114
12*80 *3 141.3 133 88.9 89 124 111
12*65 *2.1.2 141.3 133 73.0 76 124 108
12*50 *2 141.3 133 60.3 57 124 105
15*150 *6 168.3 159 168.3 159 143 143
15*125 *5 168.3 159 141.3 133 143 137
15*100 *4 168.3 159 114.3 108 143 130
15*90 *3.1/2 168.3 101.6 143 127
15*80 *3 168.3 159 88.9 89 143 124
15*65 *2.1/2 168.3 159 73.0 76 143 121
20*200 *8 219.1 219 219.1 219 178 178
20*150 *6 219.1 219 168.3 159 178 168
20*125 *5 219.1 219 141.4 133 178 162
20*100 *4 219.1 219 114.3 108 178 156
20*90 *3.1/2 219.1 101.6 178 152
25*250 1*10 273.0 273 273.0 273 216 216
25*200 1*8 273.0 273 219.1 219 216 203
25*150 1*6 273.0 273 168.3 159 216 194
25*125 1*5 273.0 273 141.3 133 216 191
25*100 1*4 273.0 273 114.3 108 216 184
30*300 1*12 323.9 325 323.9 325 254 254
30*250 1*10 323.9 325 273.0 273 254 241
30*200 1*8 323.9 325 219.1 219 254 229
30*150 1*6 323.9 325 168.3 159 254 219
30*125 1*5 323.9 325 141.3 133 254 216
35*350 1*14 355.6 377 355.6 377 279 279
35*300 1*12 355.6 377 323.9 325 279 270
35*250 1*10 355.6 377 273.0 273 279 257
35*200 1*8 355.6 377 219.1 219 279 248
35*150 1*6 355.6 377 168.3 159 279 238
40*400 1*16 406.4 426 406.4 426 305 305
40*350 1*14 406.4 426 355.6 377 305 305
40*300 1*12 406.4 426 323.9 325 305 295
40*250 1*10 406.4 426 273.0 273 305 283
40*200 1*8 406.4 426 219.1 219 305 273
40*150 1*6 406.4 426 168.3 159 305 264
45*450 1*18 457 480 457 480 343 343
45*400 1*16 457 480 406.4 426 343 330
45*350 1*14 457 480 355.6 377 343 330
45*300 1*12 457 480 323.9 325 343 321
45*250 1*10 457 480 273.0 273 343 308
45*200 1*8 457 480 219.1 219 343 298
50*500 2*20 508 530 508 530 381 381
50*450 2*20 508 530 457 480 381 368
50*400 2*20 508 530 406.4 426 381 356
50*350 2*20 508 530 355.6 377 381 356
50*300 2*20 508 530 323.9 325 381 346
50*250 2*20 508 530 273.0 273 381 333
50*200 2*20 508 530 219.1 219 381 324

Skyland Metal & Alloys Inc. is a Govt. approved certified Stainless Steel Reducing Crosses Tee manufactuers in India. All of our Carbon Steel Grooved Reducing Crosses are manufactured and tested to international standards, and specifications as per JIS, EN, DIN, ASTM etc. We are well-known as a trusted vendor as a ASME B16.9 Reducing Crosses & distributor in your country. We have huge stock in Asia, GCC, Gulf, Middle east, UK to supply with over 28 countries, we provide after sales service and fast delivery.


ANSI B16.9 Pipe Reducing Cross Fittings Weight Chart


Nominal Diameter Outside Diameter Center to End
D1 D2
DN NPS Series A Series B Series A Series B C M
1*15 1/*1/2 21.3 18 21.3 18 25 25
1*10 1/*3/8 21.3 18 17.3 14 25 25
1*8 1/*1/4 21.3 18 13.7 10 25 25
2*20 3/*3/4 26.9 25 26.9 25 29 29
2*15 3/*1/2 26.9 25 21.3 18 29 29
2*10 3/*3/8 26.9 25 17.3 14 29 29
2*25 *1 33.7 32 33.7 32 38 38
2*20 *3/4 33.7 32 26.9 25 38 38
2*15 *1/2 33.7 32 21.3 18 38 38
3*32 1.1/*1.1/4 42.4 38 42.4 38 48 48
3*25 1.1/*1 42.4 38 33.7 32 48 48
3*20 1.1/*3/4 42.4 38 26.9 25 48 48
3*15 1.1/*1/2 42.4 38 21.3 18 48 48
4*40 1.1/*1.1/2 48.3 45 48.3 45 57 57
4*32 1.1/*1.1/4 48.3 45 42.4 38 57 57
4*25 1.1/*1 48.3 45 33.7 32 57 57
4*20 1.1/*3/4 48.3 45 26.9 25 57 57
4*15 1.1/*1/2 48.3 45 21.3 18 57 57
5*50 *2 60.3 57 60.3 57 64 64
5*40 *1.1/2 60.3 57 48.3 45 64 60
5*32 *1.1/4 60.3 57 42.4 38 64 57
5*25 *1 60.3 57 33.7 32 64 51
5*20 *3/4 60.3 57 26.9 25 64 44
6*65 2/1/*2.1/2 73.0 76 73.0 76 76 76
6*50 2/1/*2 73.0 76 60.3 57 76 70
6*40 2/1/*1.1/2 73.0 76 48.3 45 76 67
6*32 2/1/*1.1/4 73.0 76 42.4 38 76 64
6*25 2/1/*1 73.0 76 33.7 32 76 57
8*80 *3 88.9 89 88.9 89 86 86
8*65 *2.1/2 88.9 89 73.0 76 86 83
8*50 *2 88.9 89 60.3 57 86 76
8*40 *1.1/2 88.9 89 48.3 45 86 73
8*32 *1.1/4 88.9 89 42.4 38 86 70
9*90 3.1/*3.1/2 101.6 101.6 95 95
9*80 3.1/*3 101.6 88.9 89 95 92
9*65 3.1/*2.1/2 101.6 73.0 76 95 89
9*50 3.1/*2 101.6 60.3 57 95 83
9*40 3.1/*1.1/2 101.6 48.3 45 95 79
10*100 *4 114.3 108 114.3 108 105 105
10*90 *3.1/2 114.3 108 101.6 105 102
10*80 *3 114.3 108 88.9 89 105 98
10*65 *2.1/2 114.3 108 73.0 76 105 95
10*50 *2 114.3 108 60.3 57 105 89
10*40 *1.1/2 114.3 108 48.3 45 105 86
12*125 *5 141.3 133 141.3 133 124 124
12*100 *4 141.3 133 114.3 108 124 117
12*90 *3.1/2 141.3 101.6 124 114
12*80 *3 141.3 133 88.9 89 124 111
12*65 *2.1.2 141.3 133 73.0 76 124 108
12*50 *2 141.3 133 60.3 57 124 105
15*150 *6 168.3 159 168.3 159 143 143
15*125 *5 168.3 159 141.3 133 143 137
15*100 *4 168.3 159 114.3 108 143 130
15*90 *3.1/2 168.3 101.6 143 127
15*80 *3 168.3 159 88.9 89 143 124
15*65 *2.1/2 168.3 159 73.0 76 143 121
20*200 *8 219.1 219 219.1 219 178 178
20*150 *6 219.1 219 168.3 159 178 168
20*125 *5 219.1 219 141.4 133 178 162
20*100 *4 219.1 219 114.3 108 178 156
20*90 *3.1/2 219.1 101.6 178 152
25*250 1*10 273.0 273 273.0 273 216 216
25*200 1*8 273.0 273 219.1 219 216 203
25*150 1*6 273.0 273 168.3 159 216 194
25*125 1*5 273.0 273 141.3 133 216 191
25*100 1*4 273.0 273 114.3 108 216 184
30*300 1*12 323.9 325 323.9 325 254 254
30*250 1*10 323.9 325 273.0 273 254 241
30*200 1*8 323.9 325 219.1 219 254 229
30*150 1*6 323.9 325 168.3 159 254 219
30*125 1*5 323.9 325 141.3 133 254 216
35*350 1*14 355.6 377 355.6 377 279 279
35*300 1*12 355.6 377 323.9 325 279 270
35*250 1*10 355.6 377 273.0 273 279 257
35*200 1*8 355.6 377 219.1 219 279 248
35*150 1*6 355.6 377 168.3 159 279 238
40*400 1*16 406.4 426 406.4 426 305 305
40*350 1*14 406.4 426 355.6 377 305 305
40*300 1*12 406.4 426 323.9 325 305 295
40*250 1*10 406.4 426 273.0 273 305 283
40*200 1*8 406.4 426 219.1 219 305 273
40*150 1*6 406.4 426 168.3 159 305 264
45*450 1*18 457 480 457 480 343 343
45*400 1*16 457 480 406.4 426 343 330
45*350 1*14 457 480 355.6 377 343 330
45*300 1*12 457 480 323.9 325 343 321
45*250 1*10 457 480 273.0 273 343 308
45*200 1*8 457 480 219.1 219 343 298
50*500 2*20 508 530 508 530 381 381
50*450 2*20 508 530 457 480 381 368
50*400 2*20 508 530 406.4 426 381 356
50*350 2*20 508 530 355.6 377 381 356
50*300 2*20 508 530 323.9 325 381 346
50*250 2*20 508 530 273.0 273 381 333
50*200 2*20 508 530 219.1 219 381 324

We are one of the leading manufacturers and approved Duplex Steel Unequal Cross Fittings, Inconel Buttweld Unequal Cross & Hastelloy C22 Unequal Cross suppliers in India, Skyland Metal holds a large stock of Alloy Steel Unequal Cross & Reducing Cross Pipe Fittings.


Supplying ASME B16.9 Reducing Cross to our Worldwide Clients:


Ennore Petrochemical Cluster Project

Ennore Petrochemical Cluster Project (India), Chennai, India


Ophir Oil Field Development

Ophir Oil Field Development,
Offshore Peninsular, Malaysia


Chevron Indonesia Deepwater Development Project

Chevron Indonesia Deepwater Development Project,
Jakarta, Indonesia


Batangas LNG Terminal

Batangas LNG Terminal, Batangas, Philippines


Khulud Tight Gas Project

Khulud Tight Gas Project,
Yibal, Oman


Bul Hanine Redevelopment

Bul Hanine Redevelopment,
Qatari Coastline, Qatar


Zuluf Field Expansion Project

Zuluf Field Expansion Project,
Arabian Gulf, Offshore Saudi Arabia (KSA)


Abu Dhabi Gas Distribution Network Pipeline Project

Abu Dhabi Gas Distribution Network Pipeline Project,
Abu Dhabi, United Arab Emirates (UAE)


KrisEnergy’s Cambodia Oil Project

KrisEnergy’s Cambodia Oil Project,
Cambodia, Thailand


Dung Quat Refinery Project

Dung Quat Refinery Project,
Quang Ngai, Vietnam


Bahrain Deep Gas Exploration Project

Bahrain Deep Gas Exploration Project, Manama, Bahrain


Al-Zour New Refinery Project

Al-Zour New Refinery Project,
Zour, Kuwait



Looking for Stainless Steel Buttweld Unequal Cross manufacturer in India? buy from oldest Unequal Cross Fittings manufacturers in Mumbai. ASME B16.9 Unequal Cross supplier in Mumbai.
ASTM A403 SS Unequal Cross stockist in UAE, EIL approved SS Butt weld Reducing Cross Traders, BS1640 Nickel Alloy 200 Unequal Cross dealer, exporter of ANSI B16.9 Unequal Cross,Monel Buttweld Reducing Cross Wholesaler. For best deal buy from 304 SS Unequal Cross manufacturers in India.

Contact Skyland Metal to buy the highest quality and reasonably priced Buttweld Unequal Cross, Buttweld Unequal Cross Fittings, Stainless Steel Unequal Cross, Butt Weld Unequal Cross, Copper Nickel Unequal Cross & Alloy 20 Buttweld Unequal Cross in Qatar, UAE, Kuwait, Saudi Arabia, Oman, Dubai (UAE), Malaysia, Singapore, UK, Cebu - Philippines, Deira, Europe, Egypt, Gauteng - South Africa, Jubail - Saudi Arabia, Spain, Salem -Tamil Nadu, Turkey, Taiwan, USA, Sharjah - UAE, Melbourne, Brisbane, Perth, Australia, Nigeria, Pretoria - South Africa, Russia, Romania.